0
If it is dripping it is the washer, if it is coming out around the stem that is the packing needing to be replaced or some faucets have fiber cone in them that serves as packing around the stem. If your faucet is a 1/4 turn handle you need to turn the water off either at the sink or the main. If the handle screws in and out one or more complete turns you can do this with the water supply on. Shut the faucet off, remove the handle and any trim ring or cone under it that covers the stem sticking up. There should be a nut around the base of the stem. Unscrew this nut without turning the faucet on. In the nut underneath you will either have stem packing, which is a thick graphite or Teflon string or a fiber cone. replace it with new and reassemble the faucet. If using packing and it still leaks after tightening, you can either tighten it a little more to compress the packing or just add a couple more layers of packing.
What else can I help you with?
Is the washer shut off valve leaking and in need of repair?
To determine if the washer shut off valve is leaking and needs repair, check for any visible signs of water leakage around the valve. If there is water dripping or pooling, it may indicate a leak that requires fixing. It is recommended to have a professional plumber inspect and repair the valve if necessary.
Would valve cover leak cause the car to stall?
I would not expect a valve cover leak to cause a car to stall. A valve cover leak can fill the spark plug area with oil which can cause rough running.
How can I fix a leaky water valve?
To fix a leaky water valve, first turn off the water supply to the valve. Next, use a wrench to tighten the packing nut on the valve. If this doesn't stop the leak, you may need to replace the valve or the washer inside. Make sure to follow safety precautions and consult a professional if needed.
Can a blown intake manifold gasket cause a water leak?
If the leak is bad enough i believe it can but i would check your valve cover gasket first.
What is water flowing drip by drip from a pipe called?
Call it whatever you want but I get the feeling you asked it wrong. Here are some answer choices for you: leak, bad washer, worn out valve etc, How does one answer a bad question? What is a leak?
Why is my bathroom sink dripping from the faucet?
Your bathroom sink may be dripping from the faucet due to a worn-out or faulty washer, O-ring, or valve inside the faucet. This can cause water to leak and drip continuously. It is recommended to replace these parts to fix the issue and prevent further water wastage.
Why does my outdoor faucet leak when turned on?
Your outdoor faucet may be leaking when turned on due to a worn-out washer or seal inside the faucet. This can cause water to escape through the gaps, leading to a leak.
Why is my outside faucet leaking when a hose is attached?
The outside faucet may be leaking when a hose is attached due to a worn-out washer or a damaged seal in the faucet. This can cause water to escape and leak out when the hose is connected and the faucet is turned on. It is recommended to replace the washer or seal to fix the leak.
Why does my toilet run intermittently?
Your toilet may run intermittently due to a faulty flapper valve, a problem with the fill valve, or a leak in the tank. These issues can cause water to continuously leak from the tank to the bowl, leading to the intermittent running of the toilet.
Why does my toilet run periodically?
Your toilet may run periodically due to a faulty flapper valve, a problem with the fill valve, or a leak in the tank. These issues can cause water to continuously leak from the tank to the bowl, leading to the periodic running of the toilet.
What would cause water to leak out at exhaust manifold and tailpipe at same time?
A broken piston ring is the most common cause of water in the exhaust manifold. A bad valve in the cylinder head can also cause the problem.
Why does the water in my toilet keep running?
The water in your toilet may keep running due to a faulty flapper valve, a problem with the fill valve, or a leak in the tank. These issues can prevent the tank from filling properly and cause the water to continuously run.
