The AKG HSC-271 is a broadcast-quality headset (headphone + microphone combination). You will need to purchase the MK HS Minijack cable set to plug it into your Dell laptop.
A microphone typically converts acoustic energy (sound waves) into electrical energy (signal) when it receives sound waves (input). Then, it uses electrical energy to transmit the signal to a recording device or amplifier (output).
A wireless microphone uses radio signals to transmit the sound from the microphone to the amplifier or recording machine. A wired microphone has a wire or cable attached to it, connecting the microphone to the amplifier or recording machine. Both types of microphones will doubtless have some wires in them. However, with modern technology advancing at such a pace, we should not be surprised if, one day, microphones will not have any wires in them at all, the old technology being replaced by some more effective means of capturiing sound and sending it somewhere else. For more information about wireless microphones, See Related links below this box.
If you use a microphone, you would likely be speaking or singing into it to amplify your voice or sound for an audience or recording. Microphones are commonly used in various settings such as public speaking, music performances, recording studios, and video conferences to capture and transmit sound.
A low impedance microphone has better signal quality, less interference, and can transmit audio over longer distances compared to a high impedance microphone.
To allow a device to hear you and for the device to transmit the sound nearby
here is the signal flow from voice to speaker: The audio signal goes into the microphone then via radio frequencies which are received at the wireless transmitter box. This can then be plugged into a channel on a mixing desk and treated as a normal microphone input. The audio then goes out of the desk and to the amplifiers and speakers.
31 miles.
Same as mcrophones always do, pick up noise. And either record it or transmit it. Or both.
A microphone is a transducer, that converts sound pressure waves into a varying electric signal. It can then be used to amplify, record or transmit sound to various other devices.
If the motherboard has a mic jack,if not you need a sound card with one. It will only be as loud as the software allows, it is not an amplifier. But you can run it to an amp or your stereo and then to speakers.
it was used to make peoples voices louder in big groups of people.
transmit a clear message in multiple view