The use of any connector is dependant on the equipment so to answer the question, we will assume that it refers to a television. Most modern televisions have a selection of different inputs and are normally marked as AV 1, AV 2 and so on. They are likely to be different types of input but once again, that is dependant on the model. If the connectors are on an AV amplifier it is possible that they are outputs rather than inputs. If there is any doubt, it is important that you read the manual to find out before making connections.
The main differences between AV (audiovisual) and TV technology lie in their capabilities and functions. AV technology encompasses a broader range of audio and visual equipment, such as projectors, speakers, and amplifiers, while TV technology specifically refers to television sets. The impact on the viewing experience is significant, as AV technology allows for a more immersive and customizable experience with higher quality audio and visual output. TV technology, on the other hand, is more limited in terms of customization and may not provide the same level of audiovisual performance. Ultimately, the choice between AV and TV technology depends on the desired viewing experience and the specific needs of the user.
All you need is a TV tuner card that has "AV in" facility. From your Set Top Box connect the AV cord to your AV in port of your TV tuner card and you are done.
To switch your TCL TV from TV mode to AV mode, press the "Input" or "Source" button on your remote control. This will bring up a list of available inputs. Use the arrow keys to navigate to "AV" and select it by pressing "OK" or "Enter." Your TV should now switch to the AV input.
u have to use your ps3 av multi out cable
The configuration of an audio receiver can be a daunting task, given the complexity of modern equipment. Fortunately, however, most modern receivers have an interface that will allow you to configure the equipment via the TV screen. If you are still nervous about doing this your local AV dealership will be happy to set the equipment up for a fee.
check first your satellite receiver if there is an HDMI jack. connect your HDMI cables from your satellite receiver to your tv tuner. if you don't have the HDMI jack, check the AV output jack. connect the AV cables from your satellite receiver to your tv tuner. you can use either AV or HDMI.
On some TVs their are another set of AV inputs in the back of the TV (or front if you are using the back). So look closely around the back. Otherwise you will have to unplug whats there.
AV Club - 2006 TV was released on: USA: 16 September 2006 (New York Television Festival)
its technical compuers and wiring
Get your Audio out Cables coming out of the Xbox360 and plug them into your AV-in on your stereo instead of the AV-in on the TV. Tune your Stereo to AV-in Input and you're sorted.
the AV button