Y Pb Pr is a form of component video with three signals. Y is the brightness signal while Pb and Pr each carry color information. All three are required to produce a full color image and they do not carry audio. Audio will usually require a further two connectors for stereo audio.
To get sound from YPbPr (component) cables, you will need a separate audio connection such as analog audio cables or an audio extractor that combines the audio signal into the same cable as the video. YPbPr cables only carry video signals, so you must use a separate audio connection to transmit sound to your audio device.
No. Only Displayport and HDMI cables carry audio along with video.
Coaxial adapters for YPBPR cable can be found at most Radio Shack stores. This type of cable in VGA and Audio to HDMI conversions.?æ
No. They only carry separated color signals.
S-video is a two part video signal carrying luma and chroma signals (Brightness and color signals). There is no audio signal in an S-video connection so the audio will need a separate connection to operate.
Both DisplayPort and HDMI cables carry video and sound, so yes.
S-video is a video connection that uses two wires, one for black and white information (The luma signal) and one for color information (the chroma signal). It does not carry audio but S-video inputs and outputs normally have a stereo audio connection associated with them.
Nintendo released a component (YPbPr) cable when the GameCube launched, but quickly stopped supporting it. Newer consoles don't have the "Digital A/V Out" port at all. If you have one of the original models with that port, you can try to track down the component video cable, although they tend to be rather expensive since there weren't many made. There are no cheaper, third-party alternatives for this cable. To when connecting the system to your TV, you will also need the original composite (yellow/red/white) cable for the RL audio, since the component cable does not have its own audio plugs. There will be no lag if the system is connected to the TV with these cables.
I dont believe it is. YBbPr is capable of outputting High definition (1080) where as S-video is Standard Definition
No, S-video carries only a video signal. You will require an additional connection to transport audio, either analog or digital.
They are both color space video but PrPbY is analog video and CrCbY is digital video.TriviaConventionally the Y is first followed by b then r, as in YPbPr which has led to the wires being known as 'yipper' lines/cables.
No, DVI cables do not carry sound. They are designed to carry just video signals, therefore you will need a separate audio connection to hear the sound. If you have an HDMI connection, then you can use this to carry the video and the sound down the same cable.