There should be two screws holding the cover on. You will need to disconnect the supply line for the burner and pilot light, the thermocouple and the sparker wire and take the burner out as a unit.
An electric water heater typically takes around 5-10 minutes to boil a glass of water, depending on the volume of water and the power of the heater.
yes and when it breaks your water heater will leak when the steel tank rust.
As long as you own it.
There should be a dial on the front of the heater that you set the temp. with.
Yes. That model has a glasslined tank.
Being in a closed room with the heater on become stuffy an losers oxygen.
To remove the water heater element without using a socket, you can use a wrench or pliers to unscrew it from the water heater. Be sure to turn off the power and water supply before attempting to remove the element.
Personally I would not, as the cold water could thermo-shock the heater. And if you have a glass-lined tank, it will crack it and shorten the life of the tank. I would follow the manufacturer's instructions.
heater core is shot...
There should be a plate or decal on the front of the heater that says how many gallons it is. It has other information on it also.
If a sufficient amount of energy is added to a glass of ice water, the ice will melt, and if a sufficient amount of energy is removed, the water will freeze solid.
Water Heater, Water Heater Repairs, Water Heater Installation , Tank water heater, Tankless Water Heater Installation, Electric Water Heater, Gas Water Heater, Leaking Water Heater.