Sani Flow system if not able to get gravity drainage.
Install a ty fitting on the stack in the basement then run it to the sink. Put it low enough to account for a fall in the pipe, to allow proper drainage. Be sure to install a waste and vent pipe to code for both fixtures.
If the drain is adequate size, 3inch, then you could.
You can build a platform to raise the toilet enough to connect to it or get a wall mount toilet and frame a wall to hang it from.
This could be an indication of a blockage or you may need to install more venting lines.
sounds like you are going to need to install a sump for the sink to drain into and then you put a sump pump at the bottom and connect it into the houses main line.
There are special toilets designed just for this reason. They have holding tanks built into them with pumps to pump the waste up to the level of the sewer lines.
Hey is the guy on the toilet
This will depend on the construction of the basement and whether the structure has failed, or there is an existing damp-proofing that has failed. Another factor will be the drainage external to the basement. If the water pressure from the soil is very high because of poor drainage, many damp-proofing systems will fail.
form_title= Basement Windows form_header= Get some natural light in your basement with new basement windows. Is the basement completely underground?*= () Yes () No How many windows do you want to install in the basement?*= {1, 2, 3, 4, 5, More than 5} What is the size of your basement?*= _ [50]
You can install the vanity first. Then, install the tile up to the vanity and around the pipe for the toilet. Then, install the toilet. That way, you do not have to replace the tile should you ever have to replace the toilet.
That would make for an awfully low toilet.
The time it takes to assemble and install a new toilet is about one hour.