By thr NFPA and local codes
The best type of well pump for a sprinkler system is a submersible pump. Submersible pumps are efficient, reliable, and can handle the high pressure and flow rate requirements of a sprinkler system. They are also quieter and have a longer lifespan compared to other types of well pumps.
To locate sprinkler heads in your yard, you can walk around the area where the sprinkler system is installed and look for small, circular metal or plastic covers on the ground. These covers usually indicate the location of the sprinkler heads underneath. You can also refer to the original sprinkler system layout plan or contact a professional for assistance in locating the sprinkler heads.
To shut off a sprinkler system, locate the main shut-off valve for the system and turn it clockwise until it is fully closed. This will stop the flow of water to the sprinklers and deactivate the system.
To manually turn on a sprinkler system, locate the control panel or valve box for the system. Turn the valve to the "on" position or activate the system using the control panel according to the manufacturer's instructions.
Fire sprinklers and supporting pumps are considered "plumbing".
To turn off a sprinkler head, locate the main water valve that controls the sprinkler system and turn it to the "off" position. This will stop the flow of water to the sprinkler heads, effectively turning them off.
To turn on a sprinkler system using a key, locate the main control valve for the system and use the key to turn it to the "on" position. This will allow water to flow through the system and activate the sprinklers.
To locate sprinkler lines in your yard, you can use a metal detector or a wire tracer tool. These tools can help you detect the metal pipes or wires that make up the sprinkler system underground. You can also look for signs such as sprinkler heads or valve boxes that indicate the presence of the lines. If you're unsure, it's best to consult a professional to avoid damaging the system.
To turn on your sprinkler system, locate the control panel or timer for your system and set it to the desired watering schedule. Make sure the water supply valve is open, and then activate the system either manually or through the control panel.
To change the direction of a sprinkler head, locate the adjustment screw on the top of the sprinkler head. Use a screwdriver to turn the screw clockwise or counterclockwise to adjust the direction of the spray. Test the new direction by turning on the sprinkler system.
To adjust an Orbit sprinkler system, locate the adjustment screw on the sprinkler head and use a screwdriver to turn it clockwise or counterclockwise to change the spray pattern or distance. You can also adjust the flow rate by turning the flow control knob on the sprinkler head. Make sure to test the adjustments by running the system to ensure proper coverage.
To turn off the water to your sprinkler system, locate the main shut-off valve for your irrigation system. This valve is typically located near where the water supply enters your home or in a utility box in your yard. Turn the valve clockwise to shut off the water flow to your sprinkler system.