0
Setting the TCP settings on the Blackberry is very simple to do, the hardest part is acquiring the APN setting for your mobile network.
Firstly I will cover the "How to..." part:
# Go to your 'Options' from your Blackberry main menu. # Go to 'Advanced Options' # Go to 'TCP' # Enter your 'APN' ^
# Enter your 'Username' and 'Password' if required ^^ # Press the Blackberry menu button # Go to and select 'Save' and save the changes ^ Network service dependent. Please contact your service supplier for further details.
^^ Username and password may not be required by all network service suppliers.
So now for info on the TCP settings: As the TCP or APN settings are network service dependent you are required to use only the setting supplied by your carrier. This can be accomplished by following one of the following:
* Contact your service supplier for the details. ^^^ * Visit http://blackberryforums.pinstack.com/360-tcp_apn_wap_gateway_port_carrier.html * Visit http://www.activexperts.com/mmstoolkit/mmsclist/ ^^^^ ^^^ Most suppliers will not issue the detail as they are not normally required, but experience from many Blackberry users is that some 3rd party software requires TCP settings.
^^^^ More based on MMS settings but still quite informative.
What else can I help you with?
What Control Panel icon should be accessed to configure TCPIP LAN settings in a Windows PC?
To configure TCP/IP LAN settings in a Windows PC, you should access the "Network and Sharing Center" from the Control Panel. From there, click on "Change adapter settings" on the left sidebar. Right-click on the appropriate network connection (e.g., Ethernet or Wi-Fi) and select "Properties," then choose "Internet Protocol Version 4 (TCP/IPv4)" to configure the settings.
How do you configure tcp?
To configure TCP (Transmission Control Protocol), you generally need to set parameters such as the maximum segment size, window size, and timeout values in the operating system's network settings or through specific application configurations. On a Linux system, for example, you can adjust these settings using commands like sysctl to modify kernel parameters found in /proc/sys/net/ipv4. Additionally, firewall rules and network interfaces may need to be configured to optimize TCP traffic. For application-level configurations, you might modify TCP settings directly in the application's code or configuration files.
How do you configure your BlackBerry Z10 so that can be located if stolen?
The BlackBerry Z10 can be configured to be located if stolen by turning on the anti-theft feature in the settings. This will help the owner and their service provider locate the phone nearly anywhere.
1. What dialog box do you use to configure TCPIPv4 settings for the network adapter?
To configure TCP/IPv4 settings for a network adapter, you use the "Properties" dialog box of the network connection. You can access this by right-clicking on the network adapter in the "Network Connections" window, selecting "Properties," and then clicking on "Internet Protocol Version 4 (TCP/IPv4)" in the list. From there, you can set the IP address, subnet mask, default gateway, and DNS server addresses.
When creating a site link which protocol can you configure it to use?
Smtp and tcp/ip
Can we configure airtel gprs settings on sigmatel s958?
Can we configure Airtel GPRS settings on SIGMATEL S958
How do you configure the network settings on playstation 3?
Go to the Playstaion Menu and then go onto settings and scroll down to Network Settings and then configure your settings to what you need.
What protocol does the Windows Event Viewer use to configure event forwarding?
TCP and UDP
What two files are used to configure TCP Wrappers?
/etc/hosts.allow and /etc/hosts.deny
How do you configure a Xbox Kinect?
go to settings or your avatar's settings
Will a 7-11 speakout sim work on an iphone 3GS?
Yes, it will. Most phones are good except for Blackberry has problems with Speakout. You will have to configure the mms settings for the data to work, if you call them they are quite helpful.
How would one configure a WPA security?
One can configure WPA security settings by going under your internet options, which is under the control panel. While in there, there will be an option to configure your WPA settings.
