When the water from your faucet is sputtering when being turned off, then it is a sign that your water is overheating. Trickling from the valve can also mean over pressure.
If water is dripping out of the heater core it is about to go.
Cars only explode in the movies.
When you want to know when your hot water heater is broken, simply run your faucet and test the water. If it's cold, the heater is broken.
Check piping. Make sure cold line going into cold side of water heater and hot side coming out hot side. Cold feed for water heater should come off main cold line. Make sure valves are open to and from water heater.
If the oil tanker is on fire, there will be an explosion.
Yes, I know how to properly install a water heater strap for safety purposes.
Open the pop off valve on the top and see if air releases. If this does not work may need to replace water heater. This is very dangerous and can explode if the pressure builds to high!!! How do you know it's vapor locked?
If your water seems warm rather than hot, if it takes along time to get hot after using a bath. or if it comes out slightly brown.
Ah, water heater installation is like painting a happy little landscape. You'll need to find the perfect spot for your water heater, connect it to the plumbing just right, and make sure everything is secure and safe. Remember, mistakes are just happy little accidents, so take your time and enjoy the process. Happy painting, my friend!
turn off your water
You know it by touching and feeling the pipes on the hot water side; if they are hot, there is water running through the pipes and obviously the heater valve is open on hot side.
normally you have no heat and,or water on the passenger floorboard