If the tank is cylindrical, then use the following formula:
Area of a cylindrical shell:
=2*pi*r*h
=2*3.14*762/1000 *h m^2
=4.78536*h m^2
Weight of a cylindrical shell
=Area*Thickness*Density
=4.78536*h*0.003*8030
=115.279*h.......(1)
Volume of a cylinder that you required=5000 liter=5 m^3
=pi*r^2*h
=>5 m^3=3.14*[0.762]^2 *h
=>h= 5 / [3.14*[0.762]^2]
=>h=2.74 meter
Weight of a cylindrical shell
=115.279*h kg
=115.279*2.74 kg
=315.86446 kg ........(2)
**Volume of a bottom circle =3.14*0.762^2*0.003
Volume of a bottom circle=0.00546966648 m^3
Weight of a bottom circle=0.00546966648*8030
=43.92 kg.....(3)
Total weight=(2) +(3)
Total weight=315.86446 kg +43.92 kg
*Total weight of the cylindrical tank having 5000 liter capacity=359.78446 kg
*Total weight of the cylindrical tank having 10000 liter capacity
=315.86446*2 +43.92 kg
=675.64892 kg
The dimensions of an 80-gallon water tank can vary depending on the shape, but a common size for a cylindrical tank would be approximately 24 inches in diameter and 48 inches in height.
Fuel tanks vary in size, and so do their dimensions. Even two tanks of the same volume can have different dimensions. Some tanks are custom made with specific dimensions to fit in a specific location in a vehicle. Without more information, little more can be said about the dimensions of a fuel tank.
To calculate the volume of water in a tank, you need to know the tank's shape and dimensions. For a rectangular tank, multiply the length, width, and height (Volume = Length × Width × Height). For a cylindrical tank, use the formula Volume = π × radius² × height. Ensure all measurements are in the same units to obtain the volume in cubic units.
To calculate the perimeter of a tank, we need to know its shape and dimensions, such as length and width for a rectangular tank or radius for a circular tank. The volume of the tank (120 liters) does not directly give us the perimeter without additional information. If you provide the shape and dimensions, I can help calculate the perimeter.
Volume of a cylindrical tank in cubic units: pi*radius2*height
To calculate the weight of gasoline in a tank, you would need to know the volume of gasoline in the tank and its density. Multiply the volume by the density to get the weight. The density of gasoline can vary depending on factors such as temperature and composition.
To calculate the volume of a tank, we need its dimensions in three dimensions (length, width, and height). The provided dimensions, 23 and 45, appear to be length and width, but the height is missing. If you provide the height, I can help calculate the volume using the formula: Volume = Length × Width × Height.
To calculate the tank's volume, you would have to multiply its dimensions together. In this case, it will be 18 x 12 x 30, which is 6480 units cubed
The dimensions of a 55,000-barrel tank can vary depending on its design and purpose. However, a typical vertical cylindrical tank with a capacity of 55,000 barrels might have a diameter of around 25 to 30 feet and a height of approximately 30 to 40 feet. It's important to note that specific dimensions can differ based on the manufacturer and the intended use of the tank. Always refer to the manufacturer’s specifications for precise measurements.
The dimensions of a 10,000 barrel oil storage tank can vary depending on the design and shape. As a rough estimate, a cylindrical tank with a capacity of 10,000 barrels would have a diameter of approximately 42 feet and a height of around 30 feet.
The dimensions of a 3,000-gallon storage tank can vary based on its design and shape. For a cylindrical tank, typical dimensions might be around 10 feet in diameter and 16-20 feet in height. However, for rectangular tanks, dimensions could be approximately 12 feet long, 8 feet wide, and 6 feet high. Always check specific manufacturer specifications for accurate measurements.
To calculate the diameter of a cylindrical oil tank, you can use the formula: diameter = 2 * square root of (volume / (pi * height)), where the volume and height of the tank are known. Input these values into the formula to find the diameter.