0
Washing machines pump out a large volume of water and todays standards require a 2
inch drain pipe. Bathtubs generally have a one and one half inch drain. So bathtub drain will have to be increased to 2", including trap and 18 to 24" standpipe to operate correctly, and connected to the closest existing 2" line or larger line. Same 11/2 venting can be used.
What else can I help you with?
What is the name of a washer with one straight edge in a bathtub drain?
Bevel washer. one side flat and the other tapered.
When you do laundry why does the floor drain start to come up with water from the washer?
The drain from the washer to the main line is getting plugged and the floor drain is easier. Drain cleaner in the floor drain should take care of it.
How can I prevent a washer drain overflow from occurring in my laundry room?
To prevent a washer drain overflow in your laundry room, regularly inspect and clean the drain pipe, ensure it is properly connected and not clogged. Use a lint trap or filter to catch debris, and avoid overloading the washer with clothes. Additionally, consider installing a drain pan or alarm system for early detection of potential issues.
How do I properly install a washer drain hookup in my laundry room?
To properly install a washer drain hookup in your laundry room, follow these steps: Locate the existing drain pipe in your laundry room. Install a standpipe next to the drain pipe, ensuring it is at least 18 inches tall and securely fastened. Connect the standpipe to the washer's drain hose using a hose clamp. Make sure the drain hose is not kinked or twisted and that it is securely in place. Test the washer by running a cycle to ensure proper drainage. If you encounter any issues or are unsure about the installation process, consult a professional plumber for assistance.
How can I prevent water from backing up in my laundry room by installing a long washer drain hose?
To prevent water from backing up in your laundry room, you can install a long washer drain hose that reaches a proper drainage point. This will allow the water to flow out effectively and prevent any potential backups.
How can I change a bathtub drain?
To change a bathtub drain, you will need to remove the old drain by unscrewing it counterclockwise using a drain key or pliers. Then, clean the area around the drain and apply plumber's putty to the new drain before inserting it into the drain hole and tightening it clockwise. Finally, test the new drain by running water to ensure it is properly installed.
What is the purpose of a drain pan for a washer and dryer, and how does it help prevent water damage in the laundry room?
A drain pan for a washer and dryer is used to catch any water that may leak from the appliances. This helps prevent water damage in the laundry room by containing the water and directing it to a drain or a safe location, instead of allowing it to spread and potentially cause damage to the floor or surrounding areas.
How do I properly install a washer drain hose?
To properly install a washer drain hose, first ensure it is the correct length and diameter for your machine. Next, connect one end to the washer's drain outlet and the other end to a standpipe or laundry tub. Make sure the hose is secured in place to prevent leaks or kinks. Finally, test the washer to ensure proper drainage.
How do I properly install a bathtub drain assembly?
To properly install a bathtub drain assembly, first, remove the old drain if necessary. Then, apply plumber's putty to the underside of the new drain flange and insert it into the drain hole. Tighten the drain flange with a drain wrench. Next, connect the drain shoe to the drain pipe using a slip nut and washer. Finally, test the drain for leaks by filling the tub with water and checking for any drips.
How do I properly install a washer hook up in my laundry room?
To properly install a washer hook up in your laundry room, you will need to locate the water supply lines and drain pipe, connect the hoses to the water supply lines and the drain pipe, secure the connections with appropriate fittings, and test the washer for leaks before use. It is recommended to follow the manufacturer's instructions and consult a professional if needed.
How do you take a bathtub drain out?
To remove a bathtub drain, you typically need to unscrew the drain cover using a screwdriver or pliers. Then, use a drain removal tool to loosen and remove the drain flange. Finally, pull out the drain assembly from the bathtub.
Can you attach kitchen sink and dish washer to laundry drain?
yes you can do this on a runing trap but make sure that the pipe bore is wide enough!!
