0
Yes and NO depending on what kind of piping system. for drain connections yes like tub drains or fixture traps but you need access to all slip/compression fittings. and NO you can not use PVC to brass for like a discharge pipe on a waterheater PRV (pressure relief valve) or any hot water piping system
What else can I help you with?
Why use PVC tee with brass?
In general you would only do this if you need to connect a section of brass piping to a pvc section.
How do you connect brass pipe to PVC pipe?
If the brass threaded nipple is a male end and the PVC side is a female end, wrapping thread tape around the nipple and then screwing it into the female PVC end will provide a secure and watertight connection.
Is it ok to connect PVC to brass fittings?
Yes, as long as there is a mechanical connection , ie threaded. You cannot glue them to each other.
What is the chemical reaction of brass to PVC?
When brass comes into contact with PVC, a chemical reaction does not occur as they are made of different materials. Brass is an alloy of copper and zinc, while PVC is a type of plastic. However, over time, the PVC may cause discoloration or degradation of the brass surface due to possible reactions with chemicals in the PVC.
How do you conet PVC pipe to lead pipe?
Lead wipe a brass nipple into the lead pipe and then use a female adapter x PVC on the brass threads
What does the PVC pipe under a bathroom sink connect to inside the wall?
It will connect to the PVC pipe into the wall which ultimately will connect into the main sewer line outside.
Can you connect a brass coupling to brass pipes?
Yes, that is what they are made for.
Can brass glue be used on plastic PVC?
NO, PVC is very sensitive to which glue is used. In Domestic pipe applications you should use Weld-On 711
How can I connect a PVC pipe to a hose bib?
To connect a PVC pipe to a hose bib, you can use a PVC male adapter and a threaded hose bib. Simply screw the male adapter onto the hose bib and then glue the PVC pipe into the other end of the adapter using PVC cement. This will create a secure connection between the PVC pipe and the hose bib.
How do you glue pvc pipe together?
You can not glue brass directly to PVC pipe. Use male/female adapters to join these two materials. ie, a male threaded PVC end fitting glued to the PVC pipe and a female threaded brass fitting screwed onto that.
Can you connect a copper p trap to PVC?
Yeah you can
Should you use a brass threaded male fitting to a PVC threaded female fitting?
no
