First off... Is this a permanent connection or a temporary one? There may not be any one fitting that is designed to go from the pipe you have to the garden hose. You may need to use multiple pieces to achieve this.
If it is only temporary I say put a compression fitting onto the copper pipe to make it a little bigger and then just get a small rubber coupling (like a *Furnco) and clamp it together.
For a more permanent connection: Go to the hardware store and find a compression fitting that will fit the copper pipe that is compression on one end and threaded on the other. Than all you need to do it find an adapter to go from hose thread to whatever thread you put on the copper pipe. This may take two or three fittings to accomplish.
If you can bring the two pieces to the hardware store with you there should be someone there that can help you find the right parts.
*A Furnco is a brand of rubber coupling. There are other companies that make these, but Furnco is the best especially if you're dealing with pressure.
Good luck!
To connect a garden hose to an indoor faucet, you can use an indoor faucet adapter specifically designed for garden hoses. Simply screw the adapter onto the faucet and then attach the garden hose to the adapter. Make sure the connection is secure to prevent leaks.
To effectively connect your garden hose to a water source using a garden hose connector, first ensure the hose and connector are compatible in size. Then, attach one end of the hose to the connector and the other end to the water source, such as a spigot or faucet. Tighten the connections securely to prevent leaks. Turn on the water source to allow water to flow through the hose.
A hose bibb may be known as a spigot or faucet in your area. In any case, it is the valve to which you connect a garden hose.
The best way to connect a pressure washer connector to a garden hose is to first ensure both the pressure washer and garden hose are turned off. Then, attach the pressure washer connector to the garden hose by screwing it on securely. Finally, turn on the water supply and check for any leaks before using the pressure washer.
Someone would go to the hardware store to purchase a stripper connector replacement for a garden hose to fix it first. Then he or she would use pliers to connect the stripped connector to a garden hose and then it is fixed.
You can buy an adapter for that in good plumbing stores, about $5.
To connect a garden hose to a faucet using a garden hose to faucet adapter, first screw the adapter onto the faucet. Then, attach the garden hose to the adapter by twisting it on securely. Make sure the connection is tight to prevent leaks.
To connect a garden hose to your kitchen faucet, you will need a faucet adapter that matches the size and threading of your faucet. First, remove the aerator from the faucet, then attach the adapter securely to the faucet. Finally, screw the garden hose onto the adapter, ensuring a tight fit to prevent leaks. Make sure to check for compatibility and any necessary washers to ensure a good seal.
form_title= Garden Hose Reel form_header= Store your garden hose easily with a reel. How long is your garden hose?* _ [50] Where is the hose located?* _ [50] Do you want a hose really that automatically retracts?*= () Yes () No
The Karcher K4400G pressure washer typically has a 3/4-inch garden hose thread (GHT) for the pressure outlet where you connect the hose. This standard size allows for compatibility with most garden hoses and accessories. Always refer to the user manual or manufacturer's specifications for precise details.
You can find a PVC to garden hose adapter at most hardware stores or online retailers that sell plumbing supplies. These adapters are commonly used for outdoor watering needs to connect PVC pipes to garden hoses.
You can probably find the plumbing to step down to the right size but the pool pump will have more water flow then a garden hose can safely handle. Your going to ruin either the pump or yourself.