By strict calculations OR install the pipe longer then needed and after the finish work cut the pipe to the required height and install the flange
First determine what you are going to install as the shower unit. If there is to be no shower unit and it will just drain through the concrete floor, then it will be flush with the floor. If you are installing a unit, then you need to look at the unit to determine the distance obove the concrete to place the drain.
To measure how much concrete you need for your project, calculate the volume of the area to be filled with concrete by multiplying the length, width, and height. Then, divide the total volume by the yield of the concrete mix to determine the amount needed in cubic yards or cubic meters.
Water does not become concrete at any height. Concrete is a solid material made from a mixture of cement, water, and aggregates like sand and gravel.
Water does not solidify into concrete at any specific height. Concrete is a mixture of cement, water, and aggregates that hardens through a chemical process called hydration.
To calculate the amount of concrete needed for a project, you need to determine the volume of the area to be filled with concrete. This can be done by multiplying the length, width, and height of the area. Once you have the volume, you can then calculate the amount of concrete needed by dividing the volume by the coverage area of one cubic yard of concrete. This will give you the total number of cubic yards of concrete needed for the project.
yes
The noun height is an abstract noun as a word for the ideal example of something, such as the height of fashion, the height of integrity, the height of absurdity, etc.The noun height is a concrete noun as a word for something physical that can be measured, such as the height of a person, the height of a building, the height of an airplane, etc.
The concrete truck is approximately 9' wide and 10'-12' high. The height of the truck can vary due to the size of the tires on the vehicle.
The difference in level between the height of the mould and that of the highest point of the subsided concrete is measured. This difference in height in mm. is taken as Slump of Concrete.
When dealing with conrete the "slump" refers to how much will a sample sag, reduce in height in a given time frame. re: a 5" slump means that after removing the CYLINDER the concrete will lose 5 inches of elevation. The slump cylinder is the tool used to determine the slump of concrete.
To determine the magnification of a mirror, divide the height of the image by the height of the object. The result will be the magnification factor.
No, it is not possible to accurately determine someone's height from a picture without additional information or context.