WD 40
Wet they cut wet after shampoo-dry they cut it dry
Something that is damp or emptiness. These two things are not wet or dry.
A dry contact is a contact that does not provide voltage. For instance, the push-to-talk switch of a microphone, which just closes a circuit without providing voltage. A wet contact is a contact that will provide voltage when closed, like the switch on the wall that activates the 110 VAC outlet to turn a lamp on in a room. / +------o o---------(o) | +---------------------(o) Dry contact / +------o o---------(o) | --+-- --- Wet contact ------ -+- | +---------------------(o)
The savanna can be dry or wet depending on the climate
Dry garbage can be recycled and wet garbage can be used as fertilizers.
They are wet
wet
Wet
it is wet
Dry! Wet could damage it.
While powerwashing, water ran down the cord into the outdoor electrical outlet. Sparks flew, and the fuse "blew" into the off position on the master panel. I tried using a blowdryer, and it worked temporarily, then the fuse blew again. I tried using a fan blowing directly into the outlet also, but that does not appear to help. Do I need to call an electrician, or will it naturally dry out over time?
"Wet on wet" or "wet in wet" means that you are applying wet paint (usually oil, artist's colours) to a surface that you have already painted which is still wet. If using oil, then your surface would be oil based, such as linseed oil or turpentine. This technique enables you to move and blend the paint to finish a painting in one sitting. "Wet on dry" means you are applying wet paint to a dry surface that you have painted earlier and allowed to dry. You can do this to either build up an area, or as in glazing, to achieve certain effects.