I am assuming that you are talking about a wall hung urinal! Most urinals have a mounting bracket where the urinal seals against the drain line. There is a soft foam gasket that makes the seal between the urinal and the drain line. First, secure the water to the urinal, remove the flush valve, there are usually 2 screws or bolts located on at the bottom of the urinal, unscrew these and remove the urinal from the wall, replace the gasket and then replace the urinal in the reverse of removing.
Water drains from the toilet bowl after flushing because the force of the flush pushes the water down the drain pipe, creating a suction effect that pulls the water out of the bowl.
By taking shorter showers and not flushing the toilet
If the toilet and shower are in an upper floor then there is a PVC drain for both that will drain to either the sewer or septic. If there is a vertical piece to this, as there is in my basement, then you actually get some dribbling and running sounds from the water 'falling' down that vertical PVC. I get this same noise from the washing machine on the main floor draining down to the basement.
Toilets can be classified into several types based on their flushing mechanism and design. The main classifications include gravity-flush toilets, which use gravity to pull water down from the tank; pressure-assisted toilets, which use air pressure to enhance flushing power; and composting toilets, which break down waste without water. Additionally, they can be categorized by their installation style, such as floor-mounted or wall-hung models. Each type serves different needs in terms of efficiency, water usage, and space considerations.
No, it is not always appropriate to dispose of chemicals by flushing them down the sink. This can pollute water sources and harm the environment. It is important to follow proper disposal procedures for chemicals to prevent negative impacts.
There are several possible reasons why your toilet may not be flushing properly. It could be due to a clog in the drain pipe, a problem with the flushing mechanism, insufficient water in the tank, or a malfunctioning flapper valve. It is recommended to check these components and address any issues to improve the flushing performance of your toilet.
The purpose of the water pipe in a toilet system is to supply water to the toilet tank, which is necessary for flushing waste down the drain.
It is important to properly dispose of dead fish instead of flushing them down the toilet because flushing them can harm the environment. Dead fish can introduce harmful bacteria and chemicals into water systems, affecting aquatic life and water quality. Proper disposal, such as burying or composting, helps prevent pollution and protects the ecosystem.
It definitely means you don't have to pour a bucket of water down the latrine, and it smells much better.
The water may not be going down in the toilet due to a clog in the pipes or a malfunction in the flushing mechanism. It is important to address this issue promptly to prevent further problems.
The seasons are reversed, AND the flow of water is reversed. When flushing a toilet in the northern hemisphere, the water goes down clockwise. When flushing a toilet in the southern hemisphere, the water goes down counterclockwise.
Yes, that may well hang on in a narrow part. Once paper builds around it the clog will solidify. I would remove the toilet from the floor and snake it from the floor end.