By opening the walls
New pressure balance faucet or you can install a pressure balance valve in the water lines behind tub or if you have a crawl space you can install it on the water lines there. But install only too the lines to tub faucet. And they are not easy no matter where you install. I would just tell everyone not to use any water till you are done with shower.
Yes, a leaking shower faucet behind the wall can cause water damage and other issues that should be addressed promptly to prevent further damage.
To install a tub faucet with a shower diverter in your bathroom, you will need to turn off the water supply, remove the old faucet, clean the area, apply plumber's tape to the new faucet, and secure it in place. Connect the diverter to the shower pipe, attach the new faucet to the water supply lines, and test for leaks. If everything is secure, turn the water supply back on and test the faucet and diverter to ensure they are working properly.
You have a leak between the diverter and showerhead or the arm for the showerhead is not sealed properly into the fitting in the wall
To remove a shower faucet, you will need to turn off the water supply, remove the handle and trim plate, unscrew the faucet assembly, and disconnect any water supply lines. It is important to follow the manufacturer's instructions and use the appropriate tools to avoid damaging the plumbing fixtures.
Your bathtub faucet may be leaking when the shower is on due to a worn-out or damaged diverter valve. This valve controls the flow of water between the faucet and the showerhead, and if it is faulty, water can leak out of the faucet while the shower is running.
Your bath faucet may be leaking when the shower is on due to a faulty diverter valve. This valve controls the flow of water between the faucet and the showerhead, and if it is not working properly, water may leak from the faucet while the shower is running.
To replace a single handle shower faucet, you will need to turn off the water supply, remove the old faucet handle and trim plate, disconnect the water lines, and install the new faucet following the manufacturer's instructions. It's important to use the correct tools and follow safety precautions during the process.
A shower faucet diverter is a valve that controls the flow of water between the showerhead and the bathtub faucet. When the diverter is turned, it redirects the water flow from the bathtub faucet to the showerhead, allowing you to switch between using the bathtub and taking a shower.
1- hot 2- cold 3- return 4- waste 5- Vent
A shower water diverter is a valve that controls the flow of water between the showerhead and the bathtub faucet. When you pull up on the diverter, it redirects the water flow from the faucet to the showerhead. When you push it down, the water flows back to the faucet. This allows you to easily switch between using the shower and the bathtub faucet.
The purpose of a shower faucet plate cover is to conceal the plumbing behind the shower wall and provide a finished look to the shower system. It contributes to the overall functionality by protecting the internal components of the faucet and preventing water leakage. Additionally, the cover enhances the aesthetics of the shower system by creating a clean and polished appearance.