answersLogoWhite

0

Usually you will have to remove and refit a new unit, which includes both connectors and solenoids.

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

How can I remove a hose from a washing machine?

To remove a hose from a washing machine, first turn off the water supply and unplug the machine. Next, use pliers to loosen the hose clamp and slide it down the hose. Twist and pull the hose off the connection point. Be prepared for any water that may spill out when removing the hose.


How do you remove the drive shaft from washing machine?

pull it out


How do you get the money from a washing machine?

If you are authorized to remove the money from a washing machine, you should have been given a key to open the money compartment.


How do you remove stuck string from washing machine?

One way to remove string that has gotten tangled around a washing machine is to wind it in the reverse direction. However, a repairman may have to be called if it is interfering with the operation of the machine.


Remove ink from washing machine?

You can use a sponge wet with rubbing alcohol to remove ink from a washing machine. It is important to rinse the sponge frequently so that you do not spread the ink around.


How can I remove the drum from a washing machine?

To remove the drum from a washing machine, you will typically need to disassemble the machine by removing the outer casing, the agitator, and any other components that may be blocking access to the drum. Once these components are removed, you can then disconnect the drum from the motor and lift it out of the machine. It is important to consult the washing machine's manual or seek professional help if you are unsure of how to safely remove the drum.


How can I remove the drain hose from a washing machine?

To remove the drain hose from a washing machine, first unplug the machine and move it away from the wall to access the back. Locate the drain hose, which is usually connected to the machine with a clamp or clip. Use pliers to loosen the clamp and carefully pull the hose off the connection point. Be prepared for some water to come out of the hose, so have a towel or bucket ready to catch any spills.


How do you remove smell of turpentine from washing machine?

Try Smelly Washer. It's an eco friendly product that takes bad odors out of your washing machine. Smellywasher.com


How do you get rid of paint thinner smell in washing machine?

One way to remove the smell of white spirit from a washing machine is to use bleach. You can also just try running your washing machine a few times without any clothes in it.


How do you remove oil based paint from the plastic inside a washing machine?

You can remove oil based paint from the plastic inside the washing machine by running an empty laundry cycle on your washing machine with bleach and a small amount of soap. Then, run another laundry cycle with just soap. Finally, put some old clothing or towels on a regular wash to see if the washing machine is completely clean.


What size drain should be used for a washing machine?

A washing machine should typically have a drain size of 2 inches to effectively remove water and prevent clogs.


What type of pliers can I get to remove washing machine hoses?

thp-1 pliers