It doesn't have a washer, it uses two small cups with springs under them. A repair kit is available for about $4. Shut the water off. Take the handle off. There should be a set screw in the front of the handle at the bottom. May have a cover plug in the hole. Under the handle is the ring or cap that holds the cartridge in. Unscrew this and the control ball that the handle was attached to will lift out ant the cups and springs are in the hole under the ball. Replace both cups and springs with new and reassemble the faucet. The springs may have one end smaller than the other, if so, that end goes up. Check the bottom of the ball for rust. It can build up and tear up the new cup fairly quickly. It should clean off fairly easily. Don't use anything too abrasive as this will leave scratches which will tear the cup also. Baking soda, white tooth paste should do the job.
absolutely!
To fix a leaky bathroom faucet with a single handle, you can start by turning off the water supply to the faucet. Then, remove the handle and the cartridge inside the faucet. Check for any worn out or damaged parts, such as the O-rings or seals, and replace them if necessary. Reassemble the faucet and turn the water supply back on to test for leaks.
To replace the Moen single handle bathroom faucet cartridge, first turn off the water supply. Remove the handle and trim to access the cartridge. Use pliers to pull out the old cartridge and insert the new one in the same position. Reassemble the faucet and turn the water supply back on.
The average price for a single hole bathroom faucet can range from 80 to 300 hundred dollars. This will depend on the type of fit and design you are looking for.
To repair a Delta single handle bathroom faucet using a repair kit, first turn off the water supply. Remove the handle and cartridge using a wrench and pliers. Replace the old cartridge with the new one from the repair kit. Reassemble the faucet and turn the water supply back on to test for leaks.
To repair a Moen single handle bathroom faucet, you can start by turning off the water supply to the faucet. Next, remove the handle and cartridge to inspect for any damage or debris. Clean or replace any worn parts, such as the cartridge or O-rings. Reassemble the faucet and test for leaks before turning the water supply back on. If the issue persists, consider contacting a professional plumber for further assistance.
To replace a single handle kitchen faucet, first turn off the water supply. Then, disconnect the old faucet and remove it. Install the new faucet by following the manufacturer's instructions. Finally, turn the water supply back on and test the new faucet for leaks.
To repair a Delta single handle bathroom faucet, you can start by turning off the water supply, removing the handle, and replacing any worn out or damaged parts such as the cartridge or seals. You may need a repair kit specific to your faucet model. Follow the manufacturer's instructions carefully to ensure proper installation and functioning of the faucet.
To replace a faucet cartridge in a single-handle faucet, first turn off the water supply. Remove the handle and trim cap, then unscrew the cartridge retaining nut. Pull out the old cartridge and insert the new one in its place. Reassemble the faucet and turn the water supply back on.
When choosing bathroom faucets, consider factors such as the style and finish that match your bathroom decor, the type of faucet (e.g. single-handle or widespread), the material and durability of the faucet, water efficiency features, and the ease of installation and maintenance.
A single-handle faucet with a compact design is often the best choice for a small bathroom sink. It offers ease of use and saves space, making it a practical and stylish option for limited counter space.
To replace a single handle shower faucet, you will need to turn off the water supply, remove the old faucet handle and trim plate, disconnect the water lines, and install the new faucet following the manufacturer's instructions. It's important to use the correct tools and follow safety precautions during the process.