Remove the handle. Cut off the water supply! Remove the nut holding the stem in the faucet. Unscrew the stem. In the end is a screw and the old washer. Also inside the fauct is a seat that the washer must seal upon. That is generally replaceble or can be cleaned up in cronic leak situations.
Your tub spout may be dripping due to a worn-out washer or O-ring inside the spout. To fix it, you can try replacing the washer or O-ring. If that doesn't work, you may need to replace the entire spout.
Your diverter tub spout may be leaking due to a worn-out washer or O-ring inside the spout. To fix it, you can try replacing the washer or O-ring. If that doesn't work, you may need to replace the entire spout.
Connection of the washer drain hose to the tub drain is very important. This will help prevent leaks for example.
It is best top replace the tub facet with the valve that are compatible to avoid leaks or the parts not fitting properly. Home Depot or Lowes should have the parts available.
You can run your discharge pipe from the washer into a laundry tub with the drain put in. After the wash cycle, the water will discharge from the washer into the laundry tub. Keep the water in there and replace the washer discharge pipe back into the usual drain. Let the washer run it's normal cycle. Take the clothes out and put them in the dryer or on the clothes line. The next step is the tricky part. You have to get a pump of some sort to put the discharged soapy water from the laundry tub back into the washer. This water will still be okay to wash the next set of clothes. I would wash the whites first, though. lol
typically a washer pump breaks. Replace it. How to replace a washer pump?
There is the Haier HERHLP21E Portable Washer with Stainless Steel Tub.
it has a motor in the base and that connects to front and rear washer jets.
Your tub handle may be leaking due to a worn out or damaged washer or O-ring inside the handle. To fix it, you can try replacing the washer or O-ring. If that doesn't work, you may need to replace the entire handle assembly. It's important to turn off the water supply to the tub before attempting any repairs. If you're unsure or uncomfortable with fixing it yourself, consider hiring a professional plumber to help.
Sounds like a venting problem. The washer is trying to push the water down the drain and the tub is an easier route. When it stops pumping, the washer drain become the vent and lets the air escape. You can try some drain cleaner in the tub and the washer drains. This may open it enough to help.
"How do you replace 1999 BMW 528i washer pump?"
how to replace the washer pump on a 2009 toyota camry