Just rotate (twist) it to the position you want. It's a little stiff, but it will rotate.
Explain how the fan belt gets energy to rotate
A conveyor belt is an assembly of a belt rotating around two pulleys. Either one or both of the pulleys of the conveyor belt system are powered to rotate; when they rotate, the belt moves as well, transporting the materials on the belt from one place to another.
The asteroids in the asteroid belt do move around the Sun, but they don't rotate as a single unit like a planet does. Each asteroid has its own orbital path and speed, so there isn't a specific speed at which the asteroid belt as a whole rotates.
The thing that makes my alternator rotate came out what do they call that?
There are a number of belt clip brands available on the market; Garmin, Motorola, OtterBox, Kenwood, and Kel Tec are all popular brands. In addition to these, AT&T, Verizon, Sprint, and T-Mobile all provide their own version of belt clips.
The Kuiper belt is not an object; it is a region of the solar system. Therefore it does not have an axis of rotation
Clockwise when looking from the belt end.
broken timing belt
V-belt driven, clockwise.
Rotate means to turn. Counterclockwise=Opposite direction a clock turns. They are probably talking about rotating it on the pulley in order for it to mate correctly. Just put it back on exactly as the diagram shows. Inspect the idler to see if it is good. If not replace it.
* To replace the belt rotate the tensioner counterclockwise on V6 models or clockwise on V8 models to relieve the tension on the belt * Remove the belt from the auxiliary components
**STOP** PRIOR TO REMOVING THE BELT TAKE NOTE OF THE BELT ROUTING, CHECK FOR A DIAGRAM ON THE RADIATOR SHROUD Now to replace the belt, rotate the automatic belt tensioner counterclockwise to release belt tension. remove the belt from the auxiliary components and slowly release the tensioner. Route the new belt over the various pulleys, **see note above**, then rotate the tensioner and set the belt in the grooves. be sure the belt is seated in the grooves on all pulleys, then release slowly.