you must first unwind the crown, then pull the stem out to set the time
how do I set time on a wal mart aw watch
How do you set the time & date on diesel watch DZ-7069
digitel time set
To set the time on a Gucci wrist watch you simply pull the crown out to the middle position. You can then move the time clockwise or counter clockwise to set the correct time. Once you have the time set, push the crown back in to start the watch.
howdo you set the time on a hotaru LED watch
how do i set my active intent watch ?? tw2461 sr626sw/cr2016
I have an SPC991 round clock. It has a way to enter the current time manually, the date (XX, XX, 20XX). I have included the back pic of the clock. 1. I removed the 2032 button type battery, and the 2 AA batteries. 2. I put in a new 2032 battery and selected SET from the lowest selector switch on the back. 3. I manually moved the clock hands to 12:00 using the rotating button on the back. NOTE: the AA batteries are left out during this step. 4. Use the mode button and toggle between the digital settings to select the time and date. Once you have done this, to get the year correct I had to cycle the years 2 times. If you hold down on the correct +/- button it will enter a rapid count down on the years, then release it when you are close to the correct year and use the - button one press at a time to get down to the correct year. Once that was set the clock immediately showed the correct month, date, and automatically chose the correct day of the week. Then I inserted 2 new AA batteries and the clock is doing a fast wind up to the correct time. The pic I posted has the rotary clock adjustment for the hands (upper middle), the 2032 button battery (lower left), the click switches (lower middle) and the AA batteries middle right.
Breitling watch info at link
depends on the watch.
12:00 sharp
To set the time on a Charles Raymond watch, locate the crown on the side of the watch. Pull the crown out to its second position and rotate it to adjust the time. Once the correct time is set, push the crown back in to its original position.
as simple as that