0
How do you use Muriatic acid to clean your water heater and copper hot water pipes?
Yes you can use muriatic acid to clean out the hot water coils in a boiler. I am a license Heating technician and I use it all the time. I use 16oz per gallon of water and it does a great job of removing all the scale from inside the coils. do you have a pump to send the acid and water mixture thru the coil. vinegar and water will not touch the scale inside hot water coils in boilers. I tried it and it does not work at all.
What else can I help you with?
Do you have to use sulfuric acid to clean out a sewer pipe or can you use muriatic acid?
It is not recommended to use muriatic acid to clean sewer pipes because it can react with organic materials to produce toxic fumes. Sulfuric acid is a safer and more effective option for cleaning sewer pipes.
Can you use muriatic acid to clean sewer pipes?
Yes, muriatic acid can be used to clean sewer pipes by breaking down organic material and mineral deposits that may be clogging the pipes. However, caution should be taken when using it as it is a strong acid that can be harmful if not used properly. It is recommended to follow safety guidelines and consider alternative methods of cleaning if possible.
How do you use muriatic acid to clean a toilet?
PVC pipes resist muratic acid:AnswerBefore using muriatic acid you may want to see what it will do to the porcelain toilet bowl, the pipes (PVC was not used in older homes) and what it will do to the glue used to hold the PVS pipe joints together.
How do you clean a toilet using muriatic acid?
PVC pipes resist muratic acid:AnswerBefore using muriatic acid you may want to see what it will do to the porcelain toilet bowl, the pipes (PVC was not used in older homes) and what it will do to the glue used to hold the PVS pipe joints together.
Can you paint copper pipes to change their appearance?
Yes, you can paint copper pipes to change their appearance. Make sure to clean and prime the pipes before painting to ensure the paint adheres properly.
What are the benefits of using copper pipes in a water heater system?
Copper pipes are beneficial in water heater systems because they are durable, resistant to corrosion, have good heat conductivity, and are easy to install. These qualities help ensure efficient water flow and heat transfer, leading to a longer lifespan for the water heater system.
How do you use boric acid to clean copper pipe?
To clean copper pipes with boric acid, create a solution by mixing boric acid powder with water. Apply the solution to the copper pipes and scrub gently using a non-abrasive sponge or cloth. Rinse the pipes thoroughly with water after cleaning to remove any residue.
Will muriatic acid hurt cast iron pipes?
Yes, muriatic acid can harm cast iron pipes by corroding and weakening them. It is best to avoid using muriatic acid and opt for alternative pipe cleaning or maintenance methods that are safe for cast iron.
Can you bury copper pipes?
Yes, Type K copper pipes can be buried. Type M or L should not be buried. Also note that it should be placed in CLEAN soil above and below the piping.
Can you use-muriatic acid to clean out your pipes?
Muriatic acid or hydrochloric acid (HCl) will not harm copper pipes. I am a licensed Heating& cooling technician and I use Muriatic acid all the time to clean out hot water tankless coils and boiler hot water coils and I have seen it used to clean out hot water copper piping in houses to remove scale and mineral deposits. I use a 1/6 Submersible pump that i purchased at Home Depot. It's not a chemical pump and I have used this pump over 4 years and i have ran Muriatic acid through it at least 60 times and the pump still works great. I even took the pump apart to see if any damage was happening to it and it looked just like new. just wear long rubber gloves and full goggles for your eyes. safety glasses will not protect your eyes. the acid can splash up under the safety glasses. If you get any on your skin just rinse it off with cold water. Muriatic acid or HCl cleans up really well with water.
What are the best practices for using copper pipe cleaner liquid to effectively clean and maintain copper pipes?
To effectively clean and maintain copper pipes using copper pipe cleaner liquid, follow these best practices: Read and follow the manufacturer's instructions carefully. Wear protective gloves and goggles while handling the cleaner. Use the appropriate amount of cleaner for the size of the pipe. Allow the cleaner to sit for the recommended time before flushing it out with water. Rinse the pipes thoroughly after cleaning to remove any residue. Regularly inspect and clean the pipes to prevent buildup and corrosion.
Are copper pipes the best?
Copper pipes will last the longest. anonymous@oola.com
