answersLogoWhite

0

The sun warms the water, which is normally in thin pipes. The warm water rises into a tank which is often at the top of the heater. Colder water is then forced down into the pipes where it gets warm in turn. So the water in the tank gets warmer and warmer.

User Avatar

Wiki User

7y ago

What else can I help you with?

Related Questions

How does heating water work?

At the core of a solar water heater is a solar collector and storage tank. The solar collector turns the sun's rays into heat. Water moves through pipes within the storage tank, being heated on the way into a home.


True or False The recovery rate of a water heater indicates the average amount of water that will be heated in the tank in one hour?

The statement - The recovery rate of a water heater indicates the average amount of water that will be heated in the tank in one hour is True


How does bladder tank on top of hot water heater operate?

Water expands when it is heated, this expansion increases the pressure. The bladder tank absorbs the extra pressure, protecting the hot water heater.


What is the purpose of an expansion tank in a water heater system?

The purpose of an expansion tank in a water heater system is to accommodate the expansion of water when it is heated, preventing pressure buildup and potential damage to the system.


Why does a hot water heater need an expansion tank?

A hot water heater needs an expansion tank to accommodate the increase in water volume that occurs when water is heated, preventing pressure buildup and potential damage to the system.


Why should the immersion heater be placed at the bottom of the storage tank?

It gets warm but only if the immersion heater is switched on. The warmer water will rise slowly and start circulating in the tank, so you end up with a tank full of hot water.


How does cold water pass through a water heater?

Cold water enters a water heater through a pipe connected to the bottom of the tank. The water is then heated by a heating element or burner inside the tank before being distributed to the rest of the plumbing system.


What does a water heater do and how does it work to provide hot water in a household?

A water heater heats and stores water for household use. It works by using a heating element or burner to warm the water inside a tank. When hot water is needed, the heater releases the heated water from the tank through pipes to faucets and appliances in the home.


How does the solar heater heats up the water in the tank?

The solar panels absorb energy from then sun, the solar energy is then transformed into heat energy causing the water to heat up.


Where is the copper coil in hot water heaters?

A water heater that is a tank does not have copper coils. If gas fired, there is a burner at the bottom that heats the water in the tank the same way a tea kettle is heated on the stove. An electric heater has two heating elements in the side, top and bottom that heat the water. A tankless water heater has a coil with a flame in the middle that heats the water. This type heats the water as you use it and for as long as you want. An indirectly heated tank has a heat exchange coiled tube (calorifier) mounted inside the skin of the tank. Hot water or steam travels through the tube and radiates heat into the tank water.


Why is a solar heater called a self pumping system?

A solar heater is called a self-pumping system because it uses natural convection to circulate water or heat transfer fluid through the system. When the fluid is heated by the sun, it rises naturally, creating a pumping effect without the need for additional mechanical pumps. This self-pumping mechanism helps to save energy and reduces the complexity of the system.


What is the function of the cold water inlet in a water heater system?

The cold water inlet in a water heater system brings in cold water from the main water supply into the tank, where it is heated up to provide hot water for household use.