answersLogoWhite

0

Depends on the design, but I suspect you set the seat height to the correct position and work from that, not use the waste as a height guide.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

What waste line changes do i have to make to install a caroma dual flush toilet?

None. It is the same as a normal toilet, 3" or 4" drain.


How to install a wall hung toilet?

To install a wall-hung toilet, first locate the wall studs for support. Install a carrier frame in the wall for the toilet to hang on. Connect the water supply and waste pipes to the carrier frame. Hang the toilet on the frame and secure it in place. Finally, attach the toilet seat and test for leaks before use.


Can you install a RV toliet in your home and will it work with a septic tank?

An RV toilet is designed to be mounted over a holding tank. They use almost no water which at first might sound appealing, but unless you have a septic tank under your bathroom it would be bad news for home installation. Unless modified, an RV toilet would not be able to get the solid waste to your home septic system. A home toilet uses the force of the water to move the solid waste to your septic tank. Look for a low flush toilet or a composting toilet instead.


How do you install a wall hung toilet?

To install a wall-hung toilet, you need to first locate the wall studs for support. Then, attach the mounting bracket to the studs and secure it in place. Next, connect the water supply and waste pipes to the toilet. Finally, hang the toilet on the bracket and secure it in place.


How do I properly install a toilet flange?

To properly install a toilet flange, first ensure the floor is clean and level. Place the flange over the waste pipe and secure it with screws. Make sure it is level with the floor. Connect the toilet to the flange using wax ring and bolts. Tighten the bolts evenly and test for leaks.


How can I install a toilet flange on concrete?

To install a toilet flange on concrete, you will need to first mark the location for the flange, then drill holes into the concrete using a masonry bit. Next, insert concrete anchors into the holes and secure the flange to the concrete using screws. Finally, connect the flange to the waste pipe and ensure it is level before installing the toilet.


What are the different classifications of toilet and their uses?

The flush toiletThe flush toilet, the most common type of toilet found, sends waste through a series of pipes that lead to a sewer system and eventually a waste treatment plant or septic tank.Squat ToiletCommon in Turkish and Japanese households, this toilet looks like a porcelain hole in the floor that individuals have to hover over, with their knees bent in a squat position.UrinalsThis is the type of toilet commonly seen in men's restrooms. It is mounted against the wall and can be a single or a communal urinal.Incinerating ToiletThis is a waterless type of toilet. Instead of using water to flush away waste, it burns excrement and other waste products.Composting ToiletThis type of toilet composts human waste by removing moisture from excrement.Outhouse or Pit ToiletCommonly found at campgrounds or in extremely rural areas, this is a hole dug in the ground with a small structure built around it.PHS


What do you use the toilet for?

A toilet is used for getting rid of body waste.


Which button should be used on a dual flush toilet to conserve water effectively?

To conserve water effectively on a dual flush toilet, use the smaller flush button for liquid waste and the larger flush button for solid waste.


How do you rough in a toilet during a bathroom renovation project?

To rough in a toilet during a bathroom renovation project, you need to first determine the location for the toilet and mark the spot on the floor. Then, install the toilet flange at the correct position and connect the waste pipe to the existing plumbing system. Make sure to secure the flange properly and test for leaks before installing the toilet.


Why does toilet over flows when doing laundry?

The laundry waste pipe is fitted to the main drain near the toilet and the main pipe down the line past toilet is partly plugged, forcing the laundry waste up the toilet waste tube. You need to auger the pipe from toilet to outside. If all the piping is in ground you will have to remove toilet from floor to do this properly.


What can you put in a toilet?

Only human waste and toilet paper. NOTHING else.