A PVC pipe glue will take at least 4 hours to dry. 12 hours before putting water pressure in it.
The word "glue " alone is inadequate. There are many kinds of glue and each may take different times to dry.
It can take 2- 3 1/2. Depends on how much glue you put on the paper mache and if you used the right glue.
If water has been mixed with your glue, then it's a type of PVA glue. Mixing water with it is not a good idea, as it takes longer to set and is not a strong joint. It may take up to 2-3 hours to dry to the touch, and at least 12 hours to fully cure, due to water's time to evaporate totally.If you want good results from glue it's usually best to use them as they come.
It takes about 2 to 5 minutes but no matter what you do, don't touch it.
It usually takes 24 to 48 hrs.
Depends on how thick it is. Making questions as accurate as possible can help others to give equally exact answers. EX; How long does 2 mm glitter glue take to dry. Any question with a variable will yeild a variable answer.
Name your glue - we don't know what "glue" is unless you tell us. Some glues dry in 5 minutes, others take 10-12 hours.
Depends on the cement type. some can take up to 1 day, some 10min.
It takes about 12 hours to completely dry.
Glue in the BottleBecause air can't get in to dry it; if you leave the top off for long enough it will start to dry inside.
It depeds whatANS 2 -ABS pipe glue dries in about 25 min to half an hour, cures almost totally in 4 hours/
Mere seconds, the glue dries almost instantly if it is a heated glue gun due to air contact cooling. If the glue gun is not heated then it would depend on the type of adhesive and could take anywhere from a few seconds to a few minutes.