answersLogoWhite

0

3 seconds is ideal setting

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

Why does the water have to run for a long time to get it hot?

The water pipes are full of cold water. All that cold water has to be flushed from the pipes before the hot water from the tank reaches your faucet.


What is a faucet cartridge and how does it function in a plumbing system?

A faucet cartridge is a component in a plumbing system that controls the flow of water in a faucet. It functions by regulating the mixing of hot and cold water to provide the desired temperature and pressure when the faucet is turned on or off. The cartridge is typically made of ceramic or metal and is designed to be durable and long-lasting.


How does a frost-free faucet work to prevent freezing in cold weather?

A frost-free faucet works by having a long valve stem that extends into the heated area of a building. When the faucet is turned off, the water in the pipe drains out, preventing it from freezing and causing damage.


How does a frost-free faucet work to prevent freezing during cold weather?

A frost-free faucet works by having a long valve stem that extends into the heated area of a building. When the faucet is turned off, the water in the pipe drains out, preventing it from freezing and causing damage.


Why does the new water faucet tip say on the instructions to use the fat washer if for inside faucet but not for the outdoor faucet?

more flow but do not last as long as beveled ===


Why does your new faucet make a popping sound when the water runs?

it usually means the faucet is just getting used to being worked.it usually does not last long.


Why does it take 90 seconds to get hot water from tank to faucet?

That's just how long it takes to get the water that is sitting in the pipe out. Unless you have a circulating pump on the line so that there is always hot water at the faucet, it always takes a bit of time for the water to get hot. The hot water is in the tank, not the pipe connecting it to the faucet. There is nothing in the pipe to keep the water hot.


How much water do you use brushing teeth?

It all depends on how long you leave the faucet running.


Why is hot water coming out brown from my faucet?

Brown water coming out of your faucet could be caused by rust or sediment buildup in your pipes. This can happen when the water sits in the pipes for a long time or if there is a disturbance in the water main. It is important to have your water tested to ensure it is safe to use.


Why is it important to fix a faucet drip as soon as possible?

Fixing a faucet drip as soon as possible is important to prevent water waste and potential damage to the faucet or surrounding area. A dripping faucet can waste a significant amount of water over time, leading to higher water bills. Additionally, the constant dripping can cause wear and tear on the faucet, potentially leading to more extensive repairs or replacements in the future. Fixing the drip promptly can help save water and money in the long run.


Why does the hot water work but the cold is slow from the kitchen faucet?

It is probably due to a blockage somewhere in the coldwater pipe or faucet. The easiest to check is the faucet. Turn off the water supply valves. Then take apart the faucet and look for tiny pieces of material (usually metal) that might block the flow of water thru the portholes. If there is no blockage, then the next probable cause is blockage in the pipe. This can occur in copper pipes anywhere there is a soldered joint. The blockage comes from using too much solder so it builds up in the pipe. It is most likely the faucet. Even if you don't see blockage it could be there. You can usually replace the faucet "guts" without too much expense and its worth a try, before working on the water pipes.


When you drain an above-ground pool can you safely use the water to water your moisture-starved landscape?

Normal chroline level in pool water is nothing more than tap water out of the faucet. As long as the pool water tests normal when testing with your pool test kit, you can let your grass enjoy the water. I do it all the time when draining rain water off my above the ground pool. I put a pump in the pool and run a garden hose to the sprinkler. The grass does well.