0
-39
What else can I help you with?
Can you flow 25 gpm through 1 inch copper pipe?
Yes, easily.
How Many GPM will flow through a 8 pipe at 5 psi?
To determine the flow rate in gallons per minute (GPM) through an 8-inch pipe at 5 psi, you can use the Hazen-Williams equation or empirical formulas for flow in pipes. However, a rough estimate would suggest that at 5 psi, the flow rate would be approximately 600-700 GPM, depending on factors like pipe length, roughness, and fittings. For more accurate calculations, specific hydraulic calculations should be performed.
How many gpm of water flow through a 2 inch pipe at 100 psi?
The flow rate of water through a 2-inch pipe at 100 psi can be estimated using hydraulic calculations. Generally, a 2-inch pipe can flow around 40-50 gallons per minute (GPM) at that pressure, depending on factors like pipe length, fittings, and friction loss. For precise calculations, it's best to use the Hazen-Williams equation or consult flow tables specific to the pipe material and conditions.
Can you flow 120 gpm through 2 inch pipe?
Yes, you can flow 120 gallons per minute (gpm) through a 2-inch pipe, but it depends on various factors such as the length of the pipe, the type of fluid, and the allowable pressure drop. A 2-inch pipe has the capacity to handle this flow rate, but if the length is significant or there are many fittings, you may experience increased friction loss, which could impact the flow. Proper calculations using the Hazen-Williams equation or similar methods can help determine if the system can sustain that flow rate effectively.
4 inch drain pipe water flow in gpm?
100
What is the gpm on a 1 inch pipe horizontal with 70 psi?
The flow rate (gallons per minute, or GPM) through a 1-inch horizontal pipe at 70 PSI can vary based on factors like the length of the pipe, fittings, and fluid characteristics. However, a rough estimate for water flow through a 1-inch pipe at that pressure is approximately 20-25 GPM. For a more accurate calculation, you would need to consider additional factors, including pipe length and any elevation changes.
If flow through a 10 inch pipe is 722gpm what Is the Volocity in feet?
A pipe that is 10 inch would have the velocity of 2.75 feet. This is 2.75 feet with 722 GPM.
The gpm through 2inch water pipe?
Under 400 GPM at best (without friction)
What is the gpm through 8 pipe?
The gallons per minute (GPM) flow rate through an 8-inch pipe depends on several factors, including the pipe's length, the fluid's viscosity, and the pressure driving the fluid. For water, the flow rate can be estimated using the Hazen-Williams equation or other hydraulic formulas, typically yielding around 1,000 to 2,000 GPM at normal pressure conditions. However, for precise calculations, specific system parameters must be considered.
What is the maximum water flow through a 3 inch fire hose?
To find the maximum flow you would need to know the maximum pressure. A typical fire nozzle pressure would be up to 100 psi with a diameter of 1 to 1.25 inches. The GPM would be between 300 GPM and 460 GPM through the nozzle. If it were simply a 3-inch pipe with an oversized pump, running at 100 psi with no nozzle, you could (in theory) move over 3,000 GPM through the pipe (ignoring friction loss). Even at 80 psi, a master stream through a 2-inch nozzle moves over 1,000 GPM.
What is the flow rate of water through .75 inch pex pipe at 40 psi in gpm?
The standard formula to calculate flow(GPM - gallons per minute) from a CIRCULAR orifice is:29.7 * (the square root of the pressure) * (the square of the diameter of the flow orifice)EXAMPLE using 3/4" Pex Pipe(actual I.D. of 3/4 PEX Pipe is .677") and 40 PSI pressure:29.7 * 6.325(sq. root of 40) * .458(the square of the I.D. 3/4" pipe) =A GPM of 86.03Note: You also need to account for fittings in the loss calculations; while minimal several fitting will make a difference.
If flow through a 10 inch pipe is 722gpm what I'd the Volo city in feet?
It would 2.75 feet with a 10 inch pipe. It would be 2.75 feet with a volatility of 722 GPM.
