2 drops of Regular Clorox Bleach per quart of water
8 drops of Regular Clorox Bleach per gallon of water
1/2 teaspoon Regular Clorox Bleach per five gallons of water
If water is cloudy, double the recommended dosages of Clorox Bleach.
Only use Regular Clorox Bleach (not Fresh Scent or Lemon Fresh). To insure that Clorox Bleach is at its full strength, rotate or replace your storage bottle minimally every three months.
The amount of chlorine needed for a pool depends on its size, level of usage, and current chlorine levels. A general guideline is to add 2-4 ppm of chlorine to a pool, which can typically be achieved by adding 1/2 gallon to 1 gallon of liquid chlorine per 10,000 gallons of water. It's important to test the water regularly and adjust the chlorine levels accordingly.
To maintain proper chlorine levels in a 1000 gallon pool, you would typically add around 0.8 to 1.5 lbs of chlorine granules or tablets per week. It's important to regularly test the water and adjust the chlorine levels accordingly to ensure proper sanitation.
ppm = lbs Chlorine / lbs of water given: 1 ppm = 1 x 10e-6 1 gallon of water = 8.33 lbs 1 lb = 454 grams Therefore; 4x10e-6 = lbs Chlorine/(3000 x 8.33) lbs Chlorine = 4x10e-6 x 3000 x 8.33 lbs Chlorine = 0.09996 or 0.09996 lb x 454grams/lb = 45.38 grams 4ppm of Chlorine in a 3000 gallon pool is: 0.09996 lbs which is about 45.38 grams
about 3 oz.
NONE! ZERO! NADA! Never put chlorine in your fish tank. You want to remove chlorine from your tap water before using it in your tank.
You'll need about 240 pounds to start, to get chlorine level to correct amount
You would typically need to add around 2-3 ounces of chlorine for every 350 gallons of water in a hot tub. However, it's important to test the water regularly and adjust the chlorine levels based on the specific conditions of your hot tub.
Generally, you would need about 2-3 pounds of chlorine for a 1000 gallon pool to properly sanitize it. It's important to follow the manufacturer's instructions and recommended dosage for the specific type of chlorine you are using.
the answer is a mega gallon of water
To purify water using bleach, you can add 8 drops (or 1/8 teaspoon) of regular unscented liquid bleach per gallon of water. Stir well and let it stand for 30 minutes before using. Make sure the bleach contains 6% sodium hypochlorite and does not contain any additional additives like perfumes or color-safe agents.
A US gallon of water is 8.35 pounds. An Imperial gallon of water is 10 pounds.
The amount of chlorine you should put in a pool depends on the size of the pool and the current chlorine level. It is recommended to keep the chlorine level between 1-3 parts per million (ppm) for residential pools. Over-chlorination can be harmful, so it's important to follow manufacturer's instructions and test the water regularly.