it is around 3 million litres
The cistern.
99908977t
You hold them or get clean water for them
The special bolts that hold a toilet to the floor.
The knobs on the bottom of the toilet hold the toilet to the bolts that in turn hold the toilet in place on the floor.
If the toilet works each time on one flush, they use roughly half the water of a standard toilet. You would then use half as much a month on the toilet. They do not always flush completely on the first flush and the toilet is only a part of the water bill.
If you have to hold the toilet handle down to flush, you need to press and hold the handle until the toilet flushes completely.
Depending on the toilet, between 1 and 5 gallons.
it smoked to much.. Its clogged
It depends on what type of toilet you have. If you have an older toilet than, it may hold more than a newer toilet holds.
You should get a plunger stick it in the toilet and hold it in there till the water slows down and if that doesnt work close the toilet seat and wait til you hear a dweeling sound that means the water is going down.
To empty a toilet for removal, start by turning off the water supply valve located behind the toilet. Flush the toilet to remove as much water as possible. Use a plunger to push any remaining water down the drain. Next, disconnect the water supply line and unscrew the bolts securing the toilet to the floor. Carefully lift the toilet and empty any remaining water into a bucket. Dispose of the water properly and prepare the toilet for removal.