answersLogoWhite

0

An average flow rate cannot be determined as there are many different shower heads and each house in every country has different water pressure and not everyone may use full pressure when using a shower. But, approximately said that the average flow rate of shower water 2.5 gallons per minute at a water pressure of 80 pounds per square inch.

User Avatar

Wiki User

8y ago

What else can I help you with?

Related Questions

How much water used in a ten minute shower in litres?

Can't say because this depends on the flow coming out of the shower head. If the flow is 1ltr per minute then in 10 minutes you will use 10 litres The average shower in the US flows at a rate of 7.9 liters per minute, or 2.1 gallons per minute. A ten minute shower would consume 79 liters or 21 gallons of water.


Shower lever quit diverting water to the shower head Water flows fine through the faucet but when you turn the lever to divert to the shower head there was a banging noise and then no water.?

you did not pay bill


How much water is saved by taking a eight minute shower than a ten minute shower?

4 gallons if head delivers 2 gallons/minute


How does an electric shower head water heater work to provide hot water for showers?

An electric shower head water heater works by using electricity to heat the water as it flows through the shower head. When you turn on the shower, the water passes through a heating element inside the shower head, which warms it up before it comes out of the nozzle. This provides a continuous supply of hot water for your shower.


How much water is used in an eight-minute shower with a standard 2.2 gallon per minute shower head?

Easy to figure out 2.2 * 8 = 17.6


How many gallons of water per minute does a low flow shower head use?

About 1.25 gallons per minute.


How much water does a 7 minute shower use?

A shower head would use between 60 to 75 gallons for a 30 minute shower.


How does an electric shower head work to provide hot water for showers?

An electric shower head works by heating water as it flows through the unit using an electric heating element. When the shower is turned on, cold water enters the unit and is heated instantly, providing hot water for showers.


What is the optimal shower head flow rate for conserving water while still providing a satisfactory shower experience?

The optimal shower head flow rate for conserving water while still providing a satisfactory shower experience is around 2.5 gallons per minute.


What is the optimal flow rate of a shower head for efficient water usage and a satisfying shower experience?

The optimal flow rate of a shower head for efficient water usage and a satisfying shower experience is typically around 2.5 gallons per minute. This rate allows for a good balance between conserving water and providing enough water pressure for a comfortable shower.


How many mililetrs are there in a shower?

There is no relationship between millilitres and a shower.You are possibly asking how much water does it take to shower, in that case- the average shower head discharges about 1.5 - 2 gallons of water per minute.


How can you save water n electricity?

Instead of leaving the shower water on for a minute while the water heats up, put a bucket under the shower head while it warms up. That war, you have an entire bucket of usable water and a hot shower.