0
Assuming it is 15mm. Buy 2 15mm couplers (compression, push fit, pre-soldered or end feed) and a length of 15mm copper pipe. Chop the copper pipe that needs replacing and connect as necessary. If you need any more help just ask.
Ans 2 - If you're not familiar working with copper pipe, then it's much easier to get a length of PEX and two 'Sharkbite' or similar push fittings. This generally gives you more flexibilty and allows coverage over areas of the copper pipe that look faulty ( greenish spots) This will cost about the same but is an easier and more reliable repair for the amateur.
What else can I help you with?
Why should you not replace a section of galvanized iron pipe with copper pipe when doing plumbing repairs?
Because you will then get a 'galvanic reaction'.
How can I efficiently replace a copper pipe with PEX in my plumbing system?
To efficiently replace a copper pipe with PEX in your plumbing system, follow these steps: Turn off the water supply to the area where you will be working. Cut the copper pipe using a pipe cutter. Clean the ends of the copper pipe and PEX tubing. Install the appropriate fittings to connect the PEX tubing to the existing plumbing. Use a crimping tool to secure the connections. Turn the water supply back on and check for leaks. Insulate the PEX tubing if needed.
What is the purpose of a copper pipe plug and how is it used in plumbing systems?
A copper pipe plug is used in plumbing systems to block off or seal a pipe opening. It is typically used to close off a pipe temporarily or permanently, depending on the plumbing needs. The plug is inserted into the pipe opening and tightened to create a watertight seal, preventing water or other substances from flowing through that particular section of the pipe.
Why is copper pipe used?
it is used for plumbing
Will carbon steel pipe touching copper pipe cause electrolysis in plumbing situations?
will carbon steel pipe touching copper pipe cause electrolysis in plumbing situations using water.
How can I prevent or repair corroded copper pipes in my plumbing system?
To prevent corroded copper pipes in your plumbing system, you can install a water softener to reduce mineral buildup, avoid using harsh chemicals that can corrode the pipes, and regularly inspect for any signs of corrosion. To repair corroded copper pipes, you can use a pipe cutter to remove the corroded section and replace it with a new piece of copper pipe using soldering techniques.
What pipes for plumbing were used in Miami in 1966?
Copper pipe was common anywhere in US.
What will stop the electrolysis process on any plumbing?
Do not have dissimilar metals touching the plumbing pipe. If it is copper pipe, do not have steel or tin or anything else other than bras or copper or plastic touching the pipe
What is the meaning of cleaning eye in plumbing?
socket for cleaning copper pipe
What is the recommended size of copper pipe for a standard residential plumbing system, such as 3/4" copper pipe?
The recommended size of copper pipe for a standard residential plumbing system is typically 3/4 inch. This size is commonly used for water supply lines in homes.
How can I effectively cut copper pipe for my plumbing project?
To effectively cut copper pipe for a plumbing project, use a pipe cutter designed for copper pipes. Measure and mark the pipe where you want to cut it, then place the cutter around the pipe and tighten it. Rotate the cutter around the pipe until it cuts through. Sand the cut edges to remove burrs and ensure a smooth connection.
Copper pipe for air compresser illegal Maine?
Does Maine have a plumbing code?
