There should be a button somewhere on the TV that says "Input" or "TV input". Press that until your video, game, DVD screen etc. appears.
Go to your tv and put on FIFA 12
You make your video (Obviously) Then you put it on Youtube xx Finally Send The Video To MSP xx
In order to put your DISH Network remote back into "TV Mode," you will simply need to press the clear colored button in the upper left corner of the remote that is labeled, "TV." The button will temporarily light up red & then turn off, after the light goes out you will then have successfully put the remote into TV mode.
if they ever did it was never aired in the US
Yes, put it on analog mode then plug in sky then if you want to go to freeview switch to digital mode on your tv.
You can either make the TV large so you can fit minifigs behind it, take a picture of minifigs and put it on the screen bricks, or make the screen green, and use it as a green screen and put a video on it.
That depends on the model of Sanyo TV. If that isn't apparent to you then you shouldn't be allowed to use the internet unsupervised.
It depends on what it is. If its a video then it will play video's, movie's, play games, watch tv shows, listen to music. You can also put pictures on it to.
Probably, but most likely you'll have to use audio/video cables for the connection ans witch the TV to video inpute mode. As far as that goes, you could also use a VCR as a TV tuner.
Could be that the TV will automatically switch the audio inputs on the TV but may require a video input to be manually selected.
Put the TV on the floor and have sex on it with your girlfriend. If you don't have a girlfriend, masturbate on it.
Couple of ways to do this, depemds on your video out options on your tv. Go from the TV out on one TV to the in of the other. You will have to tune in the 2nd TV to channel 3 usually. You can also go thru a VCR with the 1st TV video out to the VCR video in and the VCR video out to the 2nd TV video in . On newer LCD tv's this is done similar. Use a video out on your main set that u want to select whats playing from. Then on the second set use the video in. You will have to use the correct mode on the first tv for what u want to play on both sets such as HDMI1 or Component 1, or Video 1, Video 2 etc. Then on your second set it will probably say AV in 1 or 2. see which one u plugged into and then change the mode on the second set to which ever one u plugged into. Now set your main set to what u want to watch and your second set to AV 1 or AV 2 , or Video 1 or Video 2 (which ever u plugged into) and you should be able to control both tv's and watch the same thing from the main set. Also, some of the newer TV's has a S-video connection. Get a s-video cable and connect it to the s-video plugs on your tv's then you can control either set from either set. such as On the main set your watching cable from your HDMI mode or Cable mode. Go to your second set and change the mode to the S-video mode. Then it will play what your main set is playing, and vise versa if you want to control the main set from the secondary set turn the secondary set to Cable in mode or HDMI 1 mode then turn your main set to S-video mode and it will play what the secondary set is playing. If your not a TV buff this may sound confusing but it is really simple. All tv's have most if not all of these different modes especially on new sets. To change mode just look on your remote to change mode, or for the AV-mode buttons to change the modes of the set.