To turn on the LED light on the Uniden model UN435, locate the power button on the device. Press and hold the button until the LED indicator lights up. If the device has a dedicated LED or light button, simply press that button to activate the light. Refer to the user manual for specific instructions related to your model if needed.
By having the SRS repaired.
Depending on the model and year...replace the relay.
Need to know what year, make and model vehicle you have.
To reset a Uniden Bearcat scanner, first turn off the device. Then, while holding down the 'Hold' and 'Function' buttons, turn the scanner back on. Continue to hold the buttons until the display shows "Initializing" or "Resetting." This process will restore the scanner to its factory settings, erasing any stored frequencies and settings.
To turn off the alarm on the Dreamer Night Light, locate the control buttons on the device. Typically, you can press the "Alarm" button or a similar icon until you hear a confirmation sound or see the alarm indicator light turn off. If the model has a touchscreen, you may need to swipe or tap the alarm setting to disable it. Always refer to the user manual for specific instructions related to your model.
To turn off the deck light on a Dodge Avenger, locate the light switch, which is typically found near the trunk area or on the overhead console. If the light has a manual switch, simply toggle it to the "off" position. Alternatively, ensure that the trunk is securely closed, as the light may automatically turn off when the trunk is not in use. If the light remains on, check the vehicle's manual for specific instructions related to your model year.
To reset the Uniden UBC360CLT scanner, turn off the device and then press and hold the "T" and "P" buttons simultaneously while turning the scanner back on. Continue holding the buttons until the display shows "Reset." Release the buttons, and the scanner will return to its factory settings. Be aware that this will erase all stored frequencies and settings.
On 2000 model there is a tiny screw bottom r/h corner of light switch that does it.
When I turn my Ford falcon on 1999 model the red light flashes on the bottom and it says DET80 or something
To operate a light switch, you simply flip the switch up to turn the light on and flip it down to turn the light off.
Right when you flick the switch to turn on the light the socket connects and the light will automatically turn on.
To reset the Timing Belt Light on an Isuzu, turn on the ignition without starting the engine. Press and hold the gas pedal for about five seconds until the light blinks and then turns off. Turn off the ignition, and the Timing Belt Light should be reset. If the light remains on, consult the owner's manual for specific instructions for your Isuzu model.