0
What else can I help you with?
Will a water heater consume gas while is not running?
A small amount to keep the pilot light going.
How can I determine if the water heater pilot light is out?
To determine if the water heater pilot light is out, locate the pilot light access panel on the water heater. Look inside to see if the pilot light is lit. If it is not lit, you may need to relight it following the manufacturer's instructions.
Why did the pilot light go out on the water heater?
The pilot light on the water heater went out because there was a lack of gas flow or a problem with the ignition system.
How do you light the pilot on a 10 year old Teledyne Lars LLG pool heater with an electronic spark?
You don't. If the heater has an electronic spark, then it doesn't have a standing pilot to light. The spark lights the pilot when there is a call for heat, which in turn lights the burners. If the heater is on and the pump is RUNNING, the heater should light automatically when the water temperature is lower than the heat setting.
How do I turn on the water heater pilot?
To turn on the water heater pilot, locate the pilot light button or knob on the water heater. Turn the knob to the "pilot" setting and hold it down. While holding the knob down, use a long lighter to ignite the pilot light. Once the pilot light is lit, continue holding the knob down for about a minute before releasing it. This should successfully turn on the water heater pilot.
When the pilot light cut off from the water heater for 2 days do you have to run water for it to reheat?
If the pilot light is on, the heater should come on by itself. If the pilot light is off then it has to be lit. If it will not stay on, the thermocouple is bad.
Why won't the water heater pilot light stay lit?
The water heater pilot light may not stay lit due to issues with the thermocouple, gas supply, or ventilation. These problems can prevent the pilot light from staying lit, leading to the water heater not functioning properly.
How can I check the water heater pilot light?
To check the water heater pilot light, locate the access panel on the water heater and look for a small flame. If the flame is out, follow the manufacturer's instructions to relight it safely.
Why does the water heater pilot go out?
The water heater pilot can go out due to issues such as a faulty thermocouple, a dirty pilot light, or a lack of gas supply.
Hot water heater pilot light works heater wont light?
Have you turned the control from Pilot to On? Have you increased the temperature setting?
How do I turn on the pilot light for my water heater?
To turn on the pilot light for your water heater, locate the pilot light assembly near the bottom of the water heater. Turn the gas control knob to the "pilot" setting and hold it down. While holding the knob down, use a long lighter to ignite the pilot light. Once the pilot light is lit, continue holding the knob down for about 30 seconds before releasing it. If the pilot light stays lit, turn the gas control knob to the "on" position to start the water heater.
Why did my water heater pilot light go out?
The pilot light on your water heater may have gone out due to a variety of reasons, such as a faulty thermocouple, a clogged pilot orifice, a gas supply issue, or a draft in the area where the water heater is located. It is important to troubleshoot and address the specific cause to safely relight the pilot light.
