answersLogoWhite

0

Sounds like the thermostat is set too high so the unit is calling for heat...

If the thermostat is set normally then the unit has a fault.

Repairing an air conditioning unit is not a Do-It-Yourself job. The best advice anyone should give you is to call a licensed Heating Ventilation and Air Conditioning (HVAC) technician to check the unit for you.

If it is faulty it can then be decided if it is worth spending money to repair it or if it makes more sense to replace it with a new one.

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

What are the common causes of water heater noise and how can it be resolved?

Common causes of water heater noise include sediment buildup, a malfunctioning heating element, or a loose heating element. To resolve these issues, you can flush the water heater to remove sediment, replace the heating element if it is faulty, or tighten the heating element if it is loose.


What is the function of the heating element in a hot water heater?

The heating element in a hot water heater is responsible for heating the water to the desired temperature, ensuring that hot water is available for use in the household.


What is the function of the heating element in a water heater?

The heating element in a water heater is responsible for heating the water to the desired temperature before it is used for various purposes like bathing or washing dishes.


Why is no hot water coming out of the faucet?

No hot water may be coming out of the faucet due to a problem with the water heater, such as a malfunctioning heating element or a lack of sufficient hot water in the tank.


What is another name for a cooker heating element?

Aga ? will this do? Edit: No idea what Aga is. Resistive element. Heating element. Heater. Burner. Do you care to specify the appliance?


Why does the pool heater run but not get hot?

The heating element is probably broken


Why does the cord of an electric heater not glow while the heating element does?

The heating element of an electric heater is a "resistor", the cord which conducts the electricity is not. The resistance of the element of an electric heater is very high. As current flows through the heating element, it becomes red hot and glows. On the other hand, the resistance of the cord is low. It does not become red hot when current flows through it.


What are the common causes of hot water heater noise and how can it be resolved?

Common causes of hot water heater noise include sediment buildup, a malfunctioning heating element, or a loose heating element. To resolve these issues, you can try flushing the tank to remove sediment, replacing the heating element, or tightening the loose element.


What is the process for replacing the heating element on an electric water heater?

To replace the heating element on an electric water heater, first, turn off the power to the heater at the circuit breaker. Then, drain the water from the tank and disconnect the wires from the old heating element. Remove the old element and install the new one in its place. Reconnect the wires and refill the tank with water. Finally, turn the power back on and test the heater to ensure it is working properly.


What is the cause of the unusual smell coming from the heater?

The unusual smell coming from the heater may be caused by dust or debris burning off the heating elements.


What happens inside a convector heater?

A convection heater works on the principle of air convection currents circulating through its body and across its heating element. Heating element heats up the air, causing it to increase in volume and become buoyant. A convection heater can have an electrical heater element, a hot water coil, or a steam coil.


What is the most common problem assoicated with a water heater?

Lower heating element goes out.