They are similar but different. PVC is stronger & more rigid than polyethlene and is used for wastelines & polyethylene is used for water lines.
PVC
NO - pvc is Polyvinyl chloride, not hgih-density polyethylene
If you think to recycling codes: - 01 is for polyethylene terephtalate (PET) - 02 is for high density polyethylene (HDPE) - 03 is for polyvinyl chloride (PVC) - 04 is for low density polyethylene (LDPE) - 05is for polypropylene (PP)
PVC in its native form is brittle and hard, adding other compounds called plasticizers makes PVC softer. Polyethylene's properties depend on the type. LDPE not as strong as HDPE due to irregular packing of polymer chains
It depends on the size of PVC. For smaller PVC you can buy fittings that glue onto the PVC and allow a thread x barb fitting to be installed. For larger pipe you should get a brass compression fitting that clamps down on the PVC and adapts to a thread x barb fitting.
No, vinyl and PVC are not the same. Vinyl is a type of plastic resin, while PVC (polyvinyl chloride) is a synthetic plastic polymer derived from vinyl. Vinyl can refer to a broader range of materials, while PVC specifically refers to a type of vinyl.
No, PE is an abbreviation for polyethylene. The abbreviation for polyester (polyethylene terephthalate) is PET.
Pretty much anything - in the UK steel, copper, polyethylene and PVC are all used where suitable.
No, it's not the same thing. Ethylene is a gas used to produce polyethylene (solid). "Polymer grade" is just a purity label for ethylene gas, means that this ethylene is pure enough to be used in polyethylene (or other polymer) production.
No, they are not the same
It's fabric coated with a polythene film. The sort of thing from which waterproof tablecloths are made. Coatings vary, as does the fabric. PVC (poly vinyl chloride) is falling out of favour gradually, as it's not very environmentally friendly, but PE (polyethylene aka polythene) and PEVA (a copolymer of polyethylene and EVA (ethylene vinyl acetate) are readily available.
It refers to the type of plastic. 1 = polyethylene terephthalate (PET or PETE) 2 = high density polyethylene (HDPE) 3 = polyvinyl chloride (PVC) 4 = low density polyethylene (LDPE) 5 = polypropylene (PP) 6 = polystyrene (PS) 7 = Other