its easy just press the display in the right spot and the display will be viewed normally that is until you hit the next bump in the road.
OR
I removed the display. Start from the cup holders and work your way up through the shifter and the CD Player/Radiozperiodz When you remove the Display unit you will need to remove the casing so that you expose the internal working like the green board and such. On the bottom you will see a ton of thin metal strands which connect to the green board. THOSE ARE NOT MAKING GOOD CONNECTIONS. Get a soldering iron and and soldering wire and get to work. Mine was flickering for quite some time and I finally got sick of it. This is way better than buying a new one for $250.
Mazda starting problems
What are 2006 Mazda 6 transmission problems.
mazda 2000 1986 have to hold key to on to keep running when starting
I have had a lot of issues with a 1995 Mazda millinia S. The problems I have been having has been O2 sensors, and engine coolant sensors which cause the engine to misfire. If you have a code reader it will show that the problem is a misfire issue. Mine only has the problem after the engine has been at operating temperature and then the problems strike. It is a cheap fix but it worked for me.
no driver display
Hi Man Check the ignition coils. I just had to change mine. And the car working fine again Mazda Owner
Yes, ours does, its terrible in the winter. Do you have any answers yet?
You might have Mazda 6 starting problems because your battery is bad or because you have a damaged starter. You might also have problems if you have no gas in the vehicle.
It has no typical transmission problems. They are very reliable.
I wish I knew. if you figure it out can you email me the solution?
You can rent a mazda miata from Zilok ( US.Zilok.com )
that stands for ambient. its the external air temp