Actually, No. The Hammond Elegante was first produced in 1981. Other than that small detail then the answer is yes -- I have an Elegante 340100 which comes with its own internal Leslie simulator, but I have it connected to an external Leslie 710 too.
no, it is not possible.
If this is a raw speaker without the radio electronics, it is not possible unless your TV has a speaker output (usually a push-in red and black bare wire connector).
you plug them in
To safely connect an 8 ohm amplifier head to a 16 ohm speaker cabinet, you can use a series connection method. Connect the positive terminal of the amplifier to the positive terminal of the speaker, and then connect the negative terminal of the speaker to the negative terminal of the amplifier. This will create a total impedance of 24 ohms, which is safe for both the amplifier and the speaker.
Speaker cable is used to connect the speaker outputs on audio devices such as a receiver or amplifier to the inputs on the speaker(s).
To connect a microphone to a speaker for optimal sound quality, use a balanced XLR cable to connect the microphone to a mixer or audio interface. Adjust the input levels on the mixer/interface to avoid distortion. Then, connect the mixer/interface to the speaker using balanced cables. Ensure the speaker is placed properly for optimal sound projection.
The speaker you connect to those terminals needs to be 4 ohms or greater.
Connect them to the TV
To connect a microphone to a speaker, you will need an audio cable with the appropriate connectors. Plug one end of the cable into the microphone and the other end into the input on the speaker. Adjust the volume levels on both the microphone and the speaker to ensure clear sound output.
You can connect a 14 speaker jack to a home tuner stereo receiver using the RCA connector.
At the back of the cone where the wires connect in
i wanna know if you can really blow a car speaker i wanna know if you can really blow a car speaker