0
The question isn't very clear, so if I'm not answering it correctly you might want to be more specific in your questioning.
Make sure the lamp is not plugged into an electrical source before starting the directions below:
It sounds like you have a lamp, maybe it has an existing socket or not? But the socket (where you screw the bulb into) is the part of the lamp that will determine if it is going to be three way or not. If you have an existing socket, remove it by loosening the set screw at the bottom, the it will probably be screwed to a shaft, so rotate the socket counter-clock-wise, as the base is separated from the socket, you can remove the wires from the socket by either cutting them or removing the bottom portion of the socket to gain access to the screws where the wire is fastened.
Then simple attach the wires to the 3-way socket and reverse the steps above.
What else can I help you with?
Why can you see both a light bulb and a lamp base?
The light bulb is inside the lamp base, right?so, when you turn on the lamp, the light shines THROUGH the lamp base, although dimmer, so you can se both. if you took the lamp base off, the light bulb would look brighter.
How can I replace a three-way light socket in my lamp?
To replace a three-way light socket in your lamp, first unplug the lamp and remove the shade and light bulb. Unscrew the socket from the lamp base and disconnect the wires. Connect the new socket's wires to the lamp wires, following the manufacturer's instructions. Screw the new socket into the lamp base and reassemble the lamp. Test the new socket with a light bulb to ensure it is working properly.
What do you call lamp shades that are put on the lamp base before the light bulb screws in?
If you are talking about the support that holds the lampshade to the lamp base it is called a "lamp harp".
What are the subsystems in a lamp?
The main subsystems in a lamp are the electrical system (power cord, socket, switch, and bulb), the shade or diffuser that covers the bulb, and the base that supports the lamp. These subsystems work together to provide illumination and functionality to the lamp.
What feature makes a gooseneck lamp different from a base lamp?
A gooseneck lamp is a lamp with a long flexible "neck" between the lamp base and the bulb. They make good reading lights as they can be bent to shed light just where it is required.
Why can you see both light bulb and lamp base?
Your lampshade may not the right size for the lamp. A good lamp store can help you select a lamp shade that suits the lamp. Another consideration is the height of the table in reference to the seat next to it.
What type of socket light bulb should I use for my lamp?
For your lamp, you should use a standard medium base socket light bulb.
What is the purpose of a lamp socket ring and how does it contribute to the functionality of a lamp?
The purpose of a lamp socket ring is to secure the lamp socket in place within the lamp base. It contributes to the functionality of the lamp by providing stability and support for the socket, ensuring that the bulb remains securely in place and making it easier to replace the bulb when needed.
Why can you see a light bulb and a lamp base?
because you just can
How can I change a lamp socket?
To change a lamp socket, first unplug the lamp. Remove the shade and light bulb. Unscrew the socket from the lamp base. Disconnect the wires from the old socket and connect them to the new socket following the same color pattern. Screw the new socket into the lamp base and reassemble the lamp.
What is another word for light bulb?
Incandescent lamp
How much electricity does a lamp use without a bulb?
None, unless there's a radio or someting else built into the lamp base.
