0
What else can I help you with?
Is RG59 Coaxial Cable compatible with RG6 Coaxial Cable?
yes RG6 should be used exclusively for satellite hookups and digital CATV. RG59 is fine for analog CATV signals but will not support the higher bandwidth used for satellite signals.
Is cable coaxial the same as satellite coaxial?
Most times they are the same but a satellite signal needs to be carried by RG6 cable it is a heavier gauge wire then say RG59. Regular or analog cable signal is sometimes carried by RG59 but digital cable should use RG6. +++ The primary specification is not conductor size but the impedance and capacitance of the cable.
Is a coax cable something everyone should buy?
Yes Definitely, most people think of surge protection as something that's required only for equipment connected Directly to an AC outlet. Less commonly understood is the fact that far more equipment is damaged from electrical surges through coaxial cables. This is largely due to improper grounding of antenna, satellite, and cable systems. Understanding how to protect connected gear from surges over coaxial cables is key for long-term equipment operation and peace of mind.
Will the Dynex Coaxial-to-RCA Connector Adapter work for my turn table?
The Dynex Coaxial-to-RCA Connector Adapter should work with any turntable.
Is a flat-panel coaxial cable different from a regular coaxial for TV/VCR use?
The only difference would be if the VCR or TV is not digital otherwise it should be fine.
What type of cable is an cable modem used for?
You should use an RG-6 cable RG-6 A type of coaxial cable with an impedance of 75 ohms and that contains an 18 AWG core conductor. RG-6 is used for television, satellite, and broadband cable connections. Source = Network+ Guide to Networks (Fifth Edition) by Tamara Dean
Can you use traditional TV in your house when you have a high definition connection from your cable company?
Yes. If your standard (traditional) TV has a coaxial (75ohm) antenna input or composite video/audio (yellow, red, and white RCA jacks) inputs, and your cable or satellite box provides these standard definition outputs, which most do, you should be able to use either hook up to view content provided by your cable or satellite receiver.
Does your new tv hAVe a AV port on it for your nes or do they not do that anymore?
You should be able to connect the RF adapter that came with you NES into the coaxial cable port on your tv even though you probably don't use that connection anymore for your cable or satellite connection. Then all you have to do is put your tv on the antenna/cable input and tune it to channel 3.
What color should a space satellite be?
Spacey.
How To Set Up Satellite Receivers?
Technology has come a long way in the past ten years or so, and especially in regard to entertainment and media devices. One of the most significant changes has been the conversion from basic cable channels and standard television programming to high definition satellite television. A lot of people want to make the switch from basic cable television to high definition satellite programming. However, many just don’t know how to install the equipment that comes with a satellite package deal. For those of you who would like to know what the process of setting up a satellite receiver is like, look no further. This article will provide all the details needed to carry out installation.First, you are going to need all of your equipment out and ready for the installation process. You don’t want to get started if you aren’t fully prepared for what is to be done. You will need to locate the coaxial wire and hook it up to the satellite dish (wherever you may have it installed). Take the cable and connect it to the in port, which is going to be somewhere on your television console.Once you have completed these steps, it is time to move on to the next course of action. Retrieve the second coaxial wire so you can hook it into the receiver’s out port. Take this and connect it with your console’s in port. If you should happen to have an HD television set and receiver, you have to hook your HDMI wire to the HDMI jack instead of your coaxial wire.Finally, you will be able to hit the power button on both your television console and the satellite receiver to start programming your channels and other options that come with satellite television. This part requires a bit of patience on the user’s part. At this point, the satellite receiver goes into the process of using its dish to scan over other satellite dish contraptions. In doing so, the satellite dish will be able to locate and bring in the clearest picture signal for your television console. This entire procedure should take no longer than five minutes. Have fun!
For satellite communication the frequency should be less than critical frequency?
For satllite communication the frequency should not be less than the critical frequency because in satellite communicaton high frequency is needed which is reflected by satellite but not by the ionosphere.
can i gt satellite tv in my area?
If you contact Royal Satellite Sales and Service at 403-381-7290 they should be able to help you they offer satellite in your area.
