They make both kinds. Just make sure it fits snug before you glue it. there are several types a 3x4 fits over 3" and inside 4" but there are ones that will go over 4" and inside 3" I had the same question, especially after installing a 3" flange inside a 3 inch pipe. The trouble with this is that you are 'narrowing down' the drain opening (i.e. restricting the flow) so that clogs are more likely. I know, cause I clogged mine and then my wax ring blew out (while removing the clog), so I had to pull toliet off. I cut out my old flange and replaced it with a 3/4 flange that fit OVER the outside of the 3" pipe. Now when you look down at the flange, you now have a 4" hole, not a narrow 3". The less restrictive opening should help prevent clogs (I hope).
Usually toilet flange is glued down onto plastic drain pipe. There is a toilet flange that can be glued inside of plastic drain pipe also.
The purpose of a toilet drain flange is to connect the toilet to the floor drain pipe. It provides a secure and stable base for the toilet to be installed on, ensuring a proper seal and preventing leaks. The flange also helps to align the toilet properly with the drain pipe, allowing for efficient and effective waste removal. Overall, the drain flange is essential for the proper installation and function of a toilet.
The bolts that come from the drain and run to to toilet help to alaign proper drainage and seal the toilet. You do not want to do the bolts set in cement idea...
The easiest solution would be to move the toilet so that it lines up with the waste pipe.
The toilet flange is typically located on the floor, directly beneath the toilet bowl. It is a circular piece that connects the toilet to the drain pipe.
A toilet flange is a circular piece of material that connects the toilet to the floor drain. Its purpose is to create a secure and watertight seal between the toilet and the plumbing system. The flange also helps to properly align the toilet with the floor drain, ensuring that waste is efficiently and safely carried away.
To install a toilet on an offset toilet flange, use an offset toilet flange adapter to align the toilet properly with the drain pipe. This adapter will help ensure stability and prevent leaks.
To install a toilet flange on top of tile, first ensure the tile is clean and level. Use a wax ring to create a seal between the flange and the toilet drain. Place the flange over the drain and secure it to the floor with screws. Make sure it is level and flush with the tile surface. Finally, attach the toilet to the flange using bolts and nuts.
The best method for replacing a toilet flange seal is to first turn off the water supply to the toilet and remove the toilet from the flange. Clean the area around the flange and remove the old seal. Install a new wax or rubber seal, making sure it is properly aligned with the drain pipe. Reattach the toilet to the flange and tighten the bolts securely. This will help prevent leaks and ensure a secure connection between the toilet and the drain pipe.
To install a new toilet flange, first remove the old flange and clean the area. Place the new flange over the drain pipe and secure it with screws. Make sure it is level and properly aligned. Finally, connect the toilet to the flange and secure it in place.
To properly set a toilet flange, first ensure the flange is level with the floor. Secure it in place using screws or bolts. Make sure the flange is tightly sealed to the drain pipe. Test for stability before installing the toilet.
To install a toilet flange correctly, first remove the old flange and clean the area. Place the new flange over the drain pipe and secure it with screws. Make sure it is level and properly aligned. Finally, connect the toilet to the flange using wax rings and bolts, then secure the toilet in place.