answersLogoWhite

0

My experience has taught me that a piece of debris is clogging up a passage within the valve. If you have galvanized pipe a flake of rust is often the culprit. Another common source of foreign objects in a water system is off site construction and maintenance of the water delivery system. If you remove the valve from the valve body will find that the passages for the water that are in the casting are often as small as 1/8 of an inch in diameter. That is not enough to allow the water volume to force even a small obstruction out of the valve body.

User Avatar

Wiki User

8y ago

What else can I help you with?

Related Questions

Why is it that the hot and cold water in my shower are not mixing properly?

The hot and cold water in your shower may not be mixing properly due to issues with the shower valve, such as a faulty cartridge or mineral buildup. This can disrupt the balance between hot and cold water, leading to inconsistent water temperature. It is recommended to have a plumber inspect and repair the shower valve to ensure proper mixing of hot and cold water.


What is the purpose of a mixing valve in a shower and how does it regulate the temperature of the water?

The purpose of a mixing valve in a shower is to blend hot and cold water to achieve a desired temperature. It regulates the temperature by adjusting the proportions of hot and cold water flowing into the shower, ensuring a consistent and comfortable temperature for the user.


What is the purpose of a thermostatic mixing valve?

The purpose of a thermostatic mixing valve is to mix hot water with cold water. This is what keeps the constant temperature in both bath and shower water.


How do you change a mixing valve in a faucet?

mixing valve in a faucet: ok I will assume you are refering to a shower valve, that is the only faucet w/a mixing valve: shut off the hot and cold water. cut out valve or unsweat it. clean and flux new valve, pipe and fittings(if used) sweat in new valve


What is the purpose of a mixing valve for a shower and how does it regulate the temperature of the water?

A mixing valve for a shower is used to control and regulate the temperature of the water by blending hot and cold water to achieve a desired temperature. It ensures a consistent and safe water temperature for a comfortable showering experience.


How can you change a dual control bathtub faucet to single control with a mixing valve?

The incoming hot and cold lines go to separate inlets on the mixing valve. The single output will go to both the spigot and the shower head.


How to adjust the mixing valve on a shower for optimal water temperature control?

To adjust the mixing valve on a shower for optimal water temperature control, first turn on the shower and let the water run until it reaches the desired temperature. Then, use a screwdriver to adjust the valve to balance the hot and cold water until you achieve the desired temperature. Test the water temperature periodically to ensure it stays consistent.


How do you keep shower temperature from changing when someone flushes the toilet or uses another sink?

Your water pressure is low. Consequently, when cold water is diverted to another application such as a toilet or a sink, the amount of cold water available at the shower mixing valve decreases as the low pressure is unable to keep up with the shower's demand. This causes a hotter mixture at the shower head. The solution is to either improve the cold water supply to the shower or to replace the shower control valve with a temperature compensating type. Pressure balancing is the cheapest and simply changes the shower temperature according to the pressure in the cold and hot water lines. When the toilet or sink is used, reduced pressure to the shower valve is detected and the valve reduces the hot water pressure, thereby maintaining the temperature. The more sophisticated approach is a thermostatic shower control valve. These are significantly more expensive, but will not reduce the pressure at the shower head (a drawback of the pressure balancing valve). The thermostatic valve would be required when one shower control valve is operating several shower heads. Moen, Kohler and Delta all make both types of control valves. They can be readily obtained from a local plumbing supply house.


How can I adjust a shower mixing valve to control the water temperature and flow effectively?

To adjust a shower mixing valve effectively, turn the handle slowly to find the desired temperature. If the water is too hot or cold, adjust the handle slightly until it's comfortable. To control the flow, adjust the handle to increase or decrease the water pressure. Practice adjusting the valve to find the right balance of temperature and flow for a comfortable shower experience.


What are the different parts of a shower faucet and how do they work together to control the flow and temperature of water?

A shower faucet typically consists of a handle, a cartridge, and a mixing valve. The handle is used to adjust the water flow and temperature. The cartridge controls the flow of water by opening and closing the valve inside the faucet. The mixing valve blends hot and cold water to achieve the desired temperature. Together, these parts work to regulate the flow and temperature of water in the shower.


How can I find the best water mixer for my shower that provides the perfect balance of hot and cold water?

To find the best water mixer for your shower that provides the perfect balance of hot and cold water, consider looking for a thermostatic mixing valve. This type of valve automatically adjusts the water temperature to maintain a consistent balance of hot and cold water, giving you a comfortable shower experience. Additionally, read reviews and compare different brands to find one that suits your needs and preferences.


What is the name of a device that equalizes hot and cold water flow to prevent temperature fluctuations?

It is called a pressure balancing valve, usually used in shower applications. Also a preset temperature mixing valve could be used depending upon what you need the device to do.