I had this happen to me then eventually my toilet started overflowing the contents of my septic tank. SUCH FUN TO CLEAN! If you on a septic tank and this is happening you may need to have it pumped or have your drain line checked. what happened to me was my drain line was pinched and couldn't disperse my gray water, so my septic filled way too fast and eventually burped. I now use RidX once a month and it keeps the gurgles at bay.
If you are not on a septic system, CALL A PLUMBER ASAP, it could be a back up but having the sewer come back in on you would likely be way worse!
the main reason the tub/toilet are effected together is they are the last things on the drain line.
Your toilet fills up with water and then slowly drains because there may be a clog in the pipes or the toilet itself. The water fills up due to the blockage, and then slowly drains as the blockage is cleared or water finds a way to pass through. It's important to address this issue promptly to prevent further problems with your plumbing system.
The function of a toilet ball valve is to control the flow of water into the toilet tank. It helps regulate the water level in the tank, ensuring that it fills to the correct level after each flush. This is important for the proper operation of the toilet system, as it prevents overfilling and ensures that the toilet flushes effectively.
30 gallons
The sewer line is plugged or collasped. The sink and bathtub may drain because they drain at a slower rate. Toilet is all at once and the drain can't handle it. Water has to go somewhere so it backs up in the sink and tub.
30 gallons
A toilet bowl which slowly empties itself after filling indicates either a downstream stoppage or a defective bowl.
You have to use toilet more
Find a toilet and go pee.
There is an old couple in Pittsburg that fills the bottles in their bathtub.
To lower the water level in the toilet bowl, you can adjust the float in the toilet tank to lower the amount of water that fills the bowl after flushing.
To lower the water level in a toilet bowl, you can adjust the float valve in the toilet tank to reduce the amount of water that fills the bowl after flushing.
The function of a toilet supply valve is to control the flow of water into the toilet tank. It contributes to the overall operation of a toilet system by allowing water to enter the tank when the toilet is flushed, which then fills the tank and enables the toilet to flush properly.