0
Probably not. There is no vent for that drain, it did not need one for a floor drain. A toilet is trying to push against the air pressure in the drain.
Normally a decent plumber will install a floor drain with in 15 feet of a vented line or will vent the FD in case irt exceeds the 15 ft ruleA Floor drain can be as small as 2" diameter and thus it is undersized for a toilet and a floor drain alread has a trap and a toilet would thus be drouble trapped
What else can I help you with?
Can a basement floor drain be tapped into to run the drain from a nearby newly installed basement toilet into it?
If you just plan on putting the toilet on top of the floor drain the answer is no. The floor drain if it leads to a septic system or city sewer would have a trap in the line which will not work with a toilet. Depending on the size of the pipe 3" minimum you could cut the floor and tie a toilet into the line. It would also have to be properly vented. I would consult a plumber on the job. Its also possible that the floor drain just goes to a dry well which could not be used. Even if it could not be used there are other ways to install a toilet below the septic or sewer line.
How does a floor drain work?
A floor drain , drains water and other liquids that spilled on the floor
How do you unplug your toilet?
Either plunge it or run a plumbers snake through to rid the blockage.
What are some common causes of a slow toilet drain and how can it be fixed?
Common causes of a slow toilet drain include clogs from toilet paper, hair, or foreign objects, as well as mineral buildup in the pipes. To fix a slow toilet drain, you can try using a plunger or a drain snake to remove the blockage. If that doesn't work, you may need to use a chemical drain cleaner or call a plumber for professional help.
If you encounter a floor drain in your work area you should?
If you encounter a floor drain in your work area you should, notify the rest and inform the relevant department. This is logical to do in order to help the situation.
What is the best way to unclog a toilet drain that is located in the wall?
To unclog a toilet drain in the wall, you can try using a toilet auger or a plumbing snake. Insert the auger into the drain and rotate it to break up and remove the clog. If that doesn't work, you may need to call a professional plumber for assistance.
Why wont your clutch work?
my clutch went to the floor what happened?
What causes sewer odors from room below bathroom when toilet is flushed?
Probably leaky drain pipe form toilet which passes through that room. Work out which corner of that room is below the toilet, you will probably see a swelling in the wall where the drain pipe is hidden. Call a plumber and get him to fix it.
Why is my toilet gurgling and how can I fix it?
Your toilet may be gurgling due to a clog in the drain pipe or a problem with the venting system. To fix it, you can try using a plunger to clear any blockages in the toilet or drain pipe. If that doesn't work, you may need to call a plumber to inspect and repair the venting system.
What is the best way to unclog a toilet drain?
The best way to unclog a toilet drain is to use a plunger. Place the plunger over the drain hole, create a tight seal, and push and pull the plunger vigorously to dislodge the clog. If the plunger doesn't work, you can try using a toilet auger or a mixture of hot water and dish soap to break up the clog.
Will drain opener work on a clogged toilet?
Depends on whats clogging it. A plunger usually works better and quicker.
How do you effectively drain a toilet bowl?
To effectively drain a toilet bowl, start by turning off the water supply valve located behind the toilet. Next, use a plunger to create a seal over the drain hole and push and pull it vigorously to dislodge any clogs. If the plunger doesn't work, try using a toilet auger to break up and remove the blockage. Finally, once the water has drained, turn the water supply back on and flush the toilet to ensure it is draining properly.
