answersLogoWhite

0

Washing machine drains into a floor drain? The drain need cleaning. Liquid drain cleaner may do it, or it may need to be snaked. Simple fix is to get a 30 gallon trash can, cut a small hole in the bottom, the size of a quarter and set it over the drain. Let the washer drain into that. The small hole will let the water drain at a rate that the floor drain can handle it.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

What does wd stand for on a floor plan?

Washing Machine & Dryer.


What are the different types of basement floor drains available for installation?

The different types of basement floor drains available for installation include traditional floor drains, square floor drains, round floor drains, and linear floor drains.


What is the recommended height for a washing machine standpipe?

The recommended height for a washing machine standpipe is typically around 36 inches above the floor level.


What is the recommended height for a washing machine outlet box?

The recommended height for a washing machine outlet box is typically around 42 inches above the floor.


What is the recommended height for the p-trap of a washing machine?

The recommended height for the p-trap of a washing machine is typically between 6 to 18 inches above the floor level.


Can you place a washing machine on the second floor?

There should not be a problem. It is highly recommended that you use a 'pan' for the washing machine. This is a big fiberglass tray that can catch all the water if machine should break and spring a leak. It would also be important to insure that the floor is solid and that the vibrations don't drive you nuts!


What is the proper height for a washing machine drain standpipe?

The proper height for a washing machine drain standpipe is typically around 36 inches above the floor. This allows for proper drainage and prevents water from backing up into the machine.


How can I properly connect a washing machine to a floor drain?

To properly connect a washing machine to a floor drain, you will need to ensure that the drain hose from the washing machine is securely attached to the floor drain. This can typically be done by using a hose clamp or zip tie to secure the connection. It is important to make sure that the hose is not kinked or twisted, as this can cause drainage issues. Additionally, you may need to adjust the height of the drain hose to ensure proper drainage.


How can I ensure a proper washing machine connection is established in my home?

To ensure a proper washing machine connection in your home, follow these steps: Check that the water supply lines are connected securely to the washing machine. Make sure the drain hose is properly connected to the drainage system. Ensure the washing machine is level and stable on the floor. Test the connections by running a small cycle to check for leaks or issues.


How do you level an Amana washing machine?

Most washing machines, including the Amana washing machine, have screws on the bottom with little pads that can adjusted to level the washer. Use a floor jack to lift up the washer and turn out one or more of the feet. Then check the level.


When your washing machine drains there is backflow from the drain pipe that runs down the wall how can you fix this?

The drain is either not high enough or partly clogged. It should be about 36 inches up off floor. Adding a bit of ABS pipe is easy, or run a thin snake down and unclog it.


How do you level your washing machine?

To level your washing machine, first ensure it is unplugged. Use a level to check that the machine is resting evenly on the floor. If not, adjust the machine's feet by turning them clockwise to raise the corner and counterclockwise to lower it until the machine is level. Recheck with the level and adjust as needed.