0
There are multiple way to wire in a network. Most common type in a small office or home would be cat5E Cable. Most practical and cost efficient. Now if you have a larger office building and need to interconnect floors, you would use fiber wire. There has been some alternate runs using RG6 etc. However at the end of the day you would need to look at your design, the distance, what speeds and amount of data that you are going to push on the network (video, Voip etc)
Once you have all the basic information, that would be your road map on designing and implementing your network.
What else can I help you with?
What do NIC stand for?
NIC stands for Network Interface Card. It is a hardware component that allows a computer to connect to a network, either wired or wireless, and communicate with other devices on the network.
What is hardware requirements for wired network?
The hardware requirements for a wired network typically include network cables (such as Ethernet cables), switches or hubs to connect multiple devices, and routers for directing traffic between networks. Additionally, network interface cards (NICs) are needed in each device to facilitate wired connections. Depending on the network's size and complexity, other components like firewalls and patch panels may also be necessary.
What hardware or devices allow computers to communicate over a network?
You can use bluetooth, a simple wired connection, or wifi to connect your computers to a network.
In a small office there are five computers a network printer and a broadband connection to the Internet. What are the devices needed to set up a wired network for these five computers the network prin?
To set up a wired network for the five computers and the network printer, you will need a network switch to connect the devices, Ethernet cables for each computer and the printer, and a router to manage the broadband Internet connection. Additionally, you'll need to ensure that the network printer has an Ethernet port for wired connectivity. Finally, a power supply for each device is essential to ensure they operate correctly.
What are the two types of network connection?
# Wireless Network # Wired Network
Characteristics of a wan?
A WAN or wide area network connects devices over several platforms. It can be wireless or wired or both.
What is the use of 4g router with ethernet?
A 4G router with Ethernet can be used to provide a wired internet connection to devices that support Ethernet connectivity. The router connects to the 4G cellular network and converts the cellular data into an Ethernet signal that can be transmitted over a wired connection. This can be useful in situations where a wired connection is preferred or required, such as for gaming devices or network-attached storage devices. Additionally, it can also be useful for providing internet access in areas where wired infrastructure is not available, or as a backup internet connection for businesses.
What is the meaning Lan card?
A LAN card, or Local Area Network card, is a hardware component that enables devices to connect to a local network, allowing for data communication between computers and other networked devices. It can be integrated into the motherboard or exist as a separate peripheral, typically using Ethernet technology. LAN cards facilitate wired connections, providing a stable and high-speed network environment for tasks such as file sharing and internet access.
What type of network requires an AP?
A wireless local area network (WLAN) typically requires an access point (AP) to connect wireless devices to a wired network. The AP acts as a bridge, allowing devices such as laptops, smartphones, and tablets to communicate with each other and access the internet through the wired infrastructure. By providing a central point of connectivity, the AP facilitates network management and enhances coverage for users.
How are loads or power -consuming devices wired?
Loads or power consuming devices are usually wired?
How do you connect to an ad-hoc network?
An ad-hoc network is completely wireless; there are no wired connections. Therefore, to create one, all devices must have a working wireless connection.
What are the hardware and software devices required for one to connect to the internet?
you need a computer in the form of PCs,laptop,smart phones,tablet network server intenet connection from your local ISP a network interface card wired access points wireless access points firewall routers browsers modems operating systems softwares
