Aluminum wiring is not very reliable.
In our experience, the most common reasons for a mobile to lose power in various circuits is due to incorrectly spliced wires or installation of devices not rated for aluminum wiring.
We have been involved in several such repairs, particularly in double wide mobiles. When the circuits are joined from one side of the mobile to the other, wire nuts or connectors rated for copper only have been used and no anti-oxidant
paste was used.
This in turn caused the connections to overheat and eventually burn off. Causing a lose of power in the remainder of the circuit.
This can also happen in the connections behind switches, plugs or light fixtures as well.
Yes, most of them do.
Almost exactly like a regular house.
Aluminum wire can be safe for electrical wiring in homes if installed properly and used with appropriate connectors. However, it is important to follow specific guidelines to prevent potential hazards such as overheating and fire risks.
Copper, aluminum, and silver are commonly used conductors in homes for electrical wiring and circuits.
Aluminum wiring in mobile homes often causes this problem. Also loose or corroded connections could be the cause. Power company transformer wire connections also corrode which can cause the problem. This is a potential fire hazard and should be checked immediately by a licensed electrician.
About 1976. The problem is that mobile homes are constructed with flimsier walls which will ignite when aluminum overheats. Copper can carry much more of a load than aluminum and therefore is safer.The real hazard with aluminum wiring is related more to bad connections and improperly completed electrical work. While aluminum wire cannot handle the flow of electrical current as well as copper, this is corrected by the use of a larger size of wire (as outlined in the CEC or NEC respectively). Therefore, assuming all other factors are taken into account, like correctly sized breakers and properly planned circuits, the wire itself will not have any issues with heating.However, the same cannot be said of wiring that was done with connectors and devices such as plugs and switches that are not rated for use with aluminum wiring.Bad connections caused by devices not rated for aluminum wiring or connectors that are not rated, can cause a poor electrical connection, which in turn will create heat. This in turn can cause wires to overheat and burn back from the bad connection and then potentially cause a fire.Through knowledgeable application of the correct strategies and materials, aluminum wiring is no different that copper wire. Both are subject to heating problems if not connected properly or sized correctly for its application.But, when installations are completed properly, these concerns are unfounded and aluminum wiring is no less safe than copper.
An average mobile home typically contains between 1,200 to 2,000 pounds of aluminum siding, depending on its size and design. This amount can vary based on factors such as the number of walls and the thickness of the siding used. Generally, aluminum siding is chosen for its durability and lightweight properties, making it a popular choice for mobile homes.
New mobile homes can be purchased online at most of the manufactures websites. This includes companies such as Clayton Homes, Expo Mobile Homes, and Skyline Homes.
No. Mobile homes are not real property.
They are still there building mobile homes - - -
SIC 2451 applies to MOBILE HOMES.
Two things are very important when using aluminum wire. First and most important is all connectors and connections must be rated for aluminum. You will see some version of AL/AL or CU/AL on or near terminal screws or in descriptions of connectors. If is says CU/CU or CU Only, then no aluminum should be connected there. (AL = aluminum; CU = copper). Second most important is all accessible terminations should be tightened at least once a year. Because this is not practical in homes, aluminum is no longer allowed in home wiring. I wish not to frighten you but it is largely true that most homes built with aluminum wiring don't exist any more . . . because they burned down! Special care must be taken to assure aluminum is maintained properly.