answersLogoWhite

0

If the pipes are continually knocking or banging it may be that the pressure fluctuation is causing vibration - If those pipes are not supported (clipped in to a rigid position) they will effective bang against each other or against flooring/wall supports.

If they are sealed units check for air locks in the circuit - this frequently caused such noises, Also check the steam feed is uninterrupted - The effect in the pipes would be like a steam piston which builds to high pressure only to release in a sudden burst

-- Also excessive condensate in the steam piping will cause knocking, usually due to improper pitch of the piping not allowing the condensate to drain properly.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

How can I prevent pipes from banging in my home?

To prevent pipes from banging in your home, you can try installing water hammer arrestors, securing loose pipes, adjusting water pressure, and insulating pipes to reduce vibrations.


How can I prevent water pipes from banging?

To prevent water pipes from banging, you can try installing water hammer arrestors, securing loose pipes, adjusting water pressure, and insulating pipes to reduce vibrations.


How can I prevent or stop banging pipes in my home?

To prevent or stop banging pipes in your home, you can try installing water hammer arrestors, securing loose pipes, adjusting water pressure, or insulating pipes to reduce noise and vibrations.


What is a Steam Coil Hammer and how is used or what does it do?

I have been unable to turn up any information whatsoever about anything called a 'steam coil hammer.' Is it possible you've gotten your terminology mixed up? I am hoping the following research might provide you with a satisfactory answer. [from dictionary.com] - a coil of pipe, or collection of connected pipes, for containing steam; -- used for heating, drying, etc. - A banging noise heard in a water pipe following an abrupt alteration of the flow with resultant pressure surges; A banging noise in steam pipes, caused by steam bubbles entering a cold pipe partially filled with water. And according to information found here Steam Coil Installation, Operation and Maintenance (PDF), if a steam coil is not mounted properly, water-hammer can be destructive to the coil(s) It is entirely possible that the term 'steam coil hammer' simply refers to the banging of steam coil pipes. I'm not sure this is what you were after. If not, if you can provide more details, perhaps I can do a little more research and find the answer you need.


Why do pipes in a steam heating system need to be insulated?

In a steam heating system, the pipes transport steam or water vapor to the radiators to heat the building. Insulating the pipes reduces the amount of heat lost to the surrounding environment. Any heat lost in the pipes cannot be used to heat the radiators, and causes the system to be less energy efficient.


Why do The pipes keep banging while the water is running?

air in the water lines causes banging and whistles/screams. Turn off main water, turn on the faucet, turn main water back on, and it should force the air out.


Why is there water banging in the pipes and how can it be resolved?

Water banging in pipes is often caused by air pockets or water hammer, which is the sudden stop of water flow in the pipes. This can be resolved by bleeding the air out of the pipes, securing loose pipes, or installing water hammer arrestors to absorb the shock of water flow.


How do you stop the pipes of your one-pipe steam boiler from banging?

Bleed the accumulated air out of the system. I did it twice a year, to improve heating efficiency, and eliminate banging noises.


What pipes used to carry steam in thermal power plants?

steam pipes.


What causes the rumbling in the pipes when the heat starts up in a steam heat system?

I'm not familiar with rumbling in pipes, but the clanking of pipes when the heat starts up is a result of the pipes expanding because of the heat. Heat causes the metal to expand slightly, and the joints creak and clank when the heat makes its way through the pipes.


How can I fix banging water pipes in my home?

To fix banging water pipes in your home, you can try installing water hammer arrestors, adjusting water pressure, securing loose pipes, or insulating pipes to reduce noise. If the problem persists, it may be best to consult a professional plumber for further assistance.


How does steam heater work?

The steam flows through a grill of pipes and the heat radiates from the pipes to the room.