0
It sounds like you need to replace your water heater. The white minerals are caused by sediment in the water heater. The sediment is corrosive and can cause either your elements or your dip tube to go bad. Flushing it out will help but only gets a portion of the sediment out. Every time you use your water it gets shaken up and pushes through the system to whatever fixture your using Check your water heater to see if it has a bad dip tube. The DIP TUBE is a plastic tube that sends the incoming cold water to the bottom of the tank to prevent it from mixing with the hot water going to your faucets. For a period of time between 1993 & 1997, most water heater manufacturers were supplied with defective dip tubes from the same manufacturing company. The problem caused the dip tube to disintegrate slowly, and the particles and chunks to clog up faucets, aerators, etc. There was a class action lawsuit that provided dip tube replacement for those who signed up in time, but that program is now over. Many people didn't hear about the problem in time even though the media reported it on new shows and in newspapers many times for several years. You may have a high magnesium percentage in your water, this does depend where you live, where you get your water and how close are you to the coast.
What else can I help you with?
What causes the white stuff to float in water after boiling?
The white stuff that floats in water after boiling is usually mineral deposits, such as calcium carbonate, that are left behind when the water evaporates. These deposits are commonly known as scale or limescale.
What causes white residue from water to form on surfaces?
The white residue from water is caused by minerals, such as calcium and magnesium, that are left behind when the water evaporates. This residue is commonly known as limescale or mineral deposits.
White substance around the coil of an ac unit?
Those are mineral deposits.
What causes the white residue that forms after boiling water?
The white residue that forms after boiling water is typically caused by minerals, such as calcium and magnesium, that are left behind as the water evaporates. This residue is known as limescale or mineral deposits.
What causes the presence of white flakes in water and how can they be effectively removed?
The presence of white flakes in water is typically caused by mineral deposits, such as calcium or magnesium, that have precipitated out of the water. These flakes can be effectively removed by using a water softener or a filtration system designed to remove minerals from the water. Additionally, regular cleaning and maintenance of plumbing fixtures can help prevent the buildup of mineral deposits in the first place.
What causes white residue in your home water?
Calcium and lime deposits will cause this .
What is the white residue that forms after boiling water?
The white residue that forms after boiling water is typically mineral deposits, such as calcium and magnesium, that are left behind as the water evaporates.
What is definition of borax?
A white mineral in some alkaline salt deposits, used in making glass and ceramics, as a metallurgical flux, and as an antiseptic.
What is the white stuff floating in my water?
The white stuff floating in your water could be mineral deposits, air bubbles, or impurities. It is recommended to have your water tested to determine the exact cause.
What has the author W H White written?
W. H. White has written: 'The book of orchids' 'Mineral deposits along the pacific coast of Canada' -- subject(s): Geology, Guidebooks
What is the white residue that can be left behind by water?
The white residue left behind by water is typically mineral deposits, such as calcium and magnesium, that have dissolved in the water and then solidified on surfaces when the water evaporates.
What could be the cause of white specks in coffee grounds?
The cause of white specks in coffee grounds could be mineral deposits from hard water or impurities in the water used to brew the coffee.
